Sharif Digital Repository

Because of the compatibility with tandem devices and the ability to be manufactured at low temperatures, inverted perovskite solar cells have generated far-ranging interest for potential commercial applications. However, their efficiency remains inadequate owing to various traps in the perovskite film and the restricted hole blocking ability of the electron transport layer. Thus, in this work, a wide-bandgap n-type semiconductor, 4,6-bis(3,5-di(pyridin-4-yl)phenyl)-2-phenylpyrimidine (B4PyPPM), to modify a perovskite film via an anti-solvent method is introduced. The nitrogen sites of pyrimidine and pyridine rings in B4PyPPM exhibit strong interactions with the undercoordinated lead ions in... 

Nickel oxide (NiOx) is a promising hole transport material in inverted organic-inorganic metal halide perovskite solar cells. However, its low intrinsic conductivity hinders its further improvement in device performance. Here, we employ a trimercapto-s-triazine trisodium salt (TTTS) as a chelating agent of Ni2+ in the NiOx layer to improve its conductivity. Due to the electron-deficient triazine ring, the TTTS complexes with Ni2+ in NiOx via a strong Ni2+-N coordination bond and increases the ratio of Ni3+:Ni2+. The increased Ni3+ concentration adjusts the band structure of NiOx, thus enhancing hole density and mobility, eventually improving the intrinsic conductivity of NiOx. As a result,... 

Perovskite materials with ABX3 structure (A: organic, B: metal, and X: halides) have attracted tremendous attention due to their outstanding optoelectronic properties. Herein, a novel approach is developed using chemical vapor deposition (CVD), i.e., metal alloying of halide-perovskite domain via ion-transfer (MAHDI) for the growth of high-quality perovskite films, grown directly from a metal precursor. This technique easily enables us to replace the toxic Pb metal (B site) with other metals using alloying approach. Using the proposed approach, we fabricated stable and efficient Pb–In perovskite solar cells (PSCs) with a maximum power conversion efficiency (PCE) of 21.2%, which is more... 

In this research, the design of a solar reverse osmosis desalination plant was investigated by integrating various components using TRNSYS and ROSA software. To this goal, a two-stage reverse osmosis system with 50% recovery in the city of Chabahar was modeled. The calculations were performed in three different case studies, i.e., a photovoltaic power plant, a solar collector power plant with Organic Rankine Cycles, and a photovoltaic thermal power plant with Organic Rankine Cycles, with the reverse osmosis desalination plant being a novel investigation. Water production and electrical energy generation of each case study were evaluated both on a daily and yearly bases. The simulation... 

This paper proposes a new energy management model for residential buildings to handle the uncertainties of demand and on-site PV generation. For this purpose, the building energy management system (BEMS) organizes a transactive energy (TE) market among plug-in electric vehicles (PEVs) to determine their charge/discharge scheduling. According to the proposed TE framework, the PEV owners get reimbursed by the BEMS for the flexibility they offer. In this regard, the PEV owners submit their response curves for reimbursement upon arrival. Then, the BEMS solves an optimization problem to maximize its own profit and determine the real-time TE market-clearing price. Afterward, based on the clearing... 

Due to the accelerated climate change, it is anticipated that the number and severity of natural disasters such as hurricanes, blizzards, and floods will be increased in the coming years. In this regard, this paper presents a distribution system planning model to improve the system resilience against hurricane. A scenario-based mathematical model is proposed to capture the random nature of weather events. Moreover, a stochastic optimization model is developed to simultaneously harden the distribution lines and place different types of distributed generation (DG) units such as microturbines (MTs), wind turbines (WTs), and photovoltaic cells (PVs). The conditional value at risk (CVaR) is used... 

The bifacial photovoltaic/thermal module is an emerging concept that can provide electricity and heat simultaneously, taking advantage of both front and rear sides of the panel; therefore, exhibiting a better performance compared to a conventional photovoltaic module or photovoltaic thermal module. In this study, four configurations of the bifacial photovoltaic/thermal module with different cooling methods have been proposed, i.e., cooling performed at either the upper or the lower surface, in parallel (applied to both upper and lower surfaces having similar start/endpoints), and swinging air back and forth (by guiding the air over the upper and lower surfaces, respectively). The... 

Switchable photochromic dyes have benefited greatly from the use of heterocyclic chemicals. The imidazole group is particularly essential because it can be transformed into dimers, which can then be radicalized in the presence of light photons. Imidazole dimers have been optimized throughout thirty years of research, allowing derivatives with diverse colors, quick reversibility, and sensitivity to different wavelengths from UV to near IR ranges. These imidazole dimers are interesting to be used in the matrices of polymers, hydrogels, glasses, solar cells, and even pharmaceuticals. The goal of this review is to look at the history, development, and future of imidazole dimers. We will also... 

Perovskite solar cells (PSCs) have shown rapid progress in a decade of extensive research and development, aiming now towards commercialization. However, the development of more facile, reliable, and reproducible manufacturing techniques will be essential for industrial production. Many lamination methods have been initially designed for organic photovoltaics (OPVs), which are conceptually similar to PSCs. Lamination could provide a low-cost and adaptable technique for the roll-to-roll production of solar cells. This review presents an overview of lamination methods for the fabrication of PSCs and OPVs. The lamination of different electrodes consisting of various materials such as metal back... 

The power-to-liquid concept is a promising strategy to convert the power plants' flue gas to value-added liquid fuels using renewable energy. This technology could potentially reduce global greenhouse gases emissions and mitigate the environmental problems associated with the fossil fuels industry. In this regard, the main objective of the present study is to propose a novel power-to-liquid plant for the synthesis of formic acid and ammonia from power plants' flue gas, emphasizing the role of electrochemical technologies and renewable energy. The system's basis is developed by the integration of CO2 electroreduction cell, alkaline water electrolysis cell, and photovoltaic panel technologies.... 

In thin-film solar cells, deposition of pinhole and the crack-free absorber layer, with the right chemical stoichiometry is highly important for high-performance solar cell devices. In solution-based CIGS solar cell technology, a nanoparticle ink approach provides phase stability of the final chalcogenide absorber layer. However, the sintering of small nanoparticles to form large grains with reduced grain boundaries is an important challenge in the fabrication process. This is usually realized by annealing in the Se atmosphere, i.e. selenization process. However, the presence of Ga in CIGS films leads to pinholes after selenization. In this study, the synthesis and deposition of high-quality... 

Low-cost inorganic hole-transporting materials (HTMs) accompanied by a printable carbon electrode is an efficient approach to address the limitation of material cost of perovskite solar cells (PSCs) and get this technology closer to commercialization. The present work is focused on optimizing the Zn/Sn ratio of Cu2ZnSnS4/carbon hole collectors in n-i-p structured PSCs, where CuInS2/carbon is applied as the reference hole collector. This composition regulation is a solution to address the challenge of composition-related defects of the Cu2ZnSnS4 (CZTS) material. The Zn/Sn ratio was tuned by the initial proportion of the zinc precursor during the nanoparticle (NP) synthesis using a heating-up... 

Perovskite solar cells fabrication process need inert or low humidity atmospheres. While highly efficient perovskite solar cells to overcome the photovoltaic marketing should be achieved stability at any environmental conditions. At high humidity, water molecules react with the perovskite layer and increase the degradation rate, leading to a drastic decrease in device performance and perovskite crystallinity. In this work, the effect of environmental humidity on photophysical parameters of wide bandgap, (WBG) perovskite layer and solar cells stability is systematically investigated and tBP is proposed as an additive in perovskite precursor to increase the moisture resistance and improve the... 

We introduce an effective method for copper indium sulfide selenide (CISSe) doping with different alkali metals (Li, Na and K) based on a pre-deposited alkali chloride layer. A simple and fast spray method is used for pre-deposition of alkali chloride layer (LiCl, NaCl, KCl) on substrate surface before spray pyrolysis deposition of copper indium disulfide CuInS2 (CIS) films followed by selenization. The different properties of alkali-doped CISSe films by the alkali chloride pre-deposition (ACPD) method were compared to the post-deposition treatment (PDT) method. Based on FESEM images, a highly compact film with large grains can be obtained for CISSe films doped with K(∼0.72 μm) and Na (∼0.56... 

Cu2ZnSnS4 (CZTS) is a good candidate for cost-effective perovskite solar cells (PSCs) due to its direct bandgap with a value of 1.4–1.5 eV. In this study, we investigate CZTS ink as an inorganic hole-transport-layer (HTL) in CsMAFAPbIBr mixed halide PSCs. We study the cell efficiency and hole extraction from the perovskite layer for different thicknesses of HTL. The optimized device exhibits better hole selectivity, and the best efficiency of the device (12.84%) is achieved for the CZTS layer with a thickness of 159 nm. The prepared samples were also tested by open-circuit voltage decay analysis and electrochemical impedance spectroscopies. Results show that the optimized device effectively... 

Solar panel flexibility plays an important role in the attitude control of satellites. Therefore, traditionally the deformations of flexible solar panels are measured with a series of sensors along the panels itself. This paper presents a novel maiden attempt to simultaneously estimate the attitude and deformation of a flexible satellite using only 2 low-cost attitude sensors namely the sun sensor and magnetometer measurements. The flexible satellite is considered as a central rigid body with two attached flexible panels in order to derive the governing dynamic equations based on the Lagrange's equation. Both Extended Kalman filter (EKF) and Unscented Kalman Filter (UKF) are employed for the... 

Here in this research, a modified interface between the electron transport layer (ETL) and the perovskite layer in a perovskite solar cell (PSC) is provided by adding the ammonium chloride (NH4Cl) to the tin oxide (SnO2) as the modified ETL of a planar structure as follows: fluorine-doped tin oxide (FTO)/NH4Cl-SnO2/Mixed cation perovskite/Copper indium disulfide (CIS)/Gold (Au). The effects of NH4Cl on ETL are investigated in different amounts from 0.003 to 0.02 M and the best results were obtained in the amount of 0.013 M. The best NH4Cl-SnO2 ETL could increase the power conversion efficiency (PCE) of fabricated planar PSC by 16.79% with open-circuit voltage (Voc) of 1.15 V and negligible... 

In this work, synthesis of CuIn0.75Ga0.25S2 (CIGS) nanoparticles, the formation of stable dispersion, deposition of high-quality films and, fabrication of thin-film Perovskite solar cells are reported. The stability of nanoparticle ink is crucial in the formation of device-quality films. The chalcogenide-based materials are widely used in thin-film solar cells; in particular, Cu(In,Ga)S2 are used as an absorber and hole transporting layer. In the present study, the nanoparticles of about 20 nm size and bandgap of 1.5 eV are synthesized using a heat-up method. A variety of solvents are used as dispersing media and the stability of the inks is evaluated by precise optical monitoring. We... 

Purpose: The paper aims to address the combined attitude control and Sun tracking problem in a flexible spacecraft in the presence of external and internal disturbances. The attitude stabilization of a flexible satellite is generally a challenging control problem, because of the facts that satellite kinematic and dynamic equations are inherently nonlinear, the rigid–flexible coupling dynamical effect, as well as the uncertainty that arises from the effect of actuator anomalies. Design/methodology/approach: To deal with these issues in the combined attitude and Sun tracking system, a novel control scheme is proposed based on the adaptive fuzzy Jacobian approach. The augmented spacecraft model... 

Fullerene derivatives with a strong electron-accepting ability play a crucial role in enhancing both the performance and stability of perovskite solar cells (PSCs). However, most of the used fullerene molecules are based on [6,6]-phenyl-C61-butyric acid methyl ester (PCBM), which limits the device performance due to difficulties in preparing high-quality and uniform thin films. Herein, solution-processable azahomofullerene (AHF) derivatives (abbreviated as AHF-1 and AHF-2) are reported as novel and effective electron-transport layers (ETLs) in p-i-n planar PSCs. Compared to the control PCBM ETL-based PSCs, the devices based on AHFs exhibit higher photovoltaic performances, which is...