Sharif Digital Repository

One of the most important problems in using wind energy is the estimation of wind energy potential of a region with acceptable accuracy. To use wind energy and convert it to electrical energy it is necessary to study the economical aspects of wind farm installation, and to choose an appropriate wind turbine to be installed in a region. To do such a study and to choose approperiate wind turbine, annual energy output of different wind turbines should be estimated in that region. The porpuse of this thesis is to develop new methods to estimate annual energy production of a wind turbine by using some of the parameters of wind speed pattern of a region such as wind speed average, wind speed... 

Application of wind energy and specially wind turbines as a green source of energy is getting more popular and as a result, the knowledge of wind energy has been improved dramatically. The purpose of this research is to determine the flow characteristics in the boundary layer profile over an airfoil which is used in a wind turbine blade. The model is sinusoidally oscillated in pitch. For the present study, the critical cross section of the wind turbine blade has been selected and the boundary layer velocity profiles over its airfoil have been investigated experimentally. Dynamic motion is produced with sinusoidal oscillator and the reduced frequency is varied in the range of 0.054 to 0.1.... 

In this research a special Three-Phase to Single-Phase converter has been proposed to connect a three-phase Permanent Magnet Synchronous Generator (PMSG) of a wind turbine to a single-phase network. Common back-to-back converter used for this application employs a bulk capacitor in its DC link to generate the pulsating component of the single-phase side instantaneous power. This capacitor is costly and reduces system overall reliability. This problem is alleviated in this work by providing the single-phase load pulsating power using the PMSG large inductances. The proposed system leaves the PMSG torque ripple-free while providing the single-phase load power. With the help of this method,... 

On account of the exhausting nature and increasing daily cost of the fossil fuels, it seems that replacing the fossil fuels by an alternative source of energy is inevitable. Moreover, in the remote areas that the electricity network is not accessible, the use of distributed sources (DSs) such as solar energy and wind energy is advantageous. Continuity of the supply and voltage control of the load in spite of the stochastic nature of the generated power of the renewable energy resources are the main concerns in the distributed generation (DG) systems. In this thesis, stand-alone operation of a DG unit comprising a solar unit and wind turbine as primary sources of energy is considered. A... 

Permanent-magnet synchronous generators have attracted more attention in recent years due to their special advantages which make them a suitable option for variable-speed wind turbines.Low-voltage ride through capability is one of the main concerns in widespread use of wind turbines in electric grids. Nowadays wind turbines are expected to remain connected to the grid during voltage dips and support the voltage recovery process by supplying reactive power.This thesis aims at behavior analysis and performance improvement of permanent-magnet synchronous generator-based wind turbines during grid faults. A simple method is presented to overcome the over current problem of the grid-side converter... 

An experimental investigation of unsteady boundary layer over a wind turbine blade conducted in a subsonic wind tunnel. The experiment performed at different positions along the airfoil chord. Model was oscillated with amplitude of ±5 cm. Reynolds number, based on airfoil chord, ranged 3˟105 upto 6.5˟105 and the reduced frequency ranged from 0.0055 to 0.0981. Velocity profile measured with a total pressure rake. The data were reduced via a low-pass filter. Increasing the reduced frequency, the velocity profile increases the level on turbulence fluctuation and becomes more attached to the surface.

 

Inappropriate effects of fossil fuels and conventional power generation systems on the environment have necessitated a sustainable energy system for the next decade by growing interests in renewable energy systems. The world’s most fast-growing renewable energy resource is the wind energy. The main problem of wind power is the power fluctuations at the load side caused by the variable nature of wind speed, and the main issue in case of remote locations is the long-term storage of power generated by wind turbines. Batteries can be used to store a limited amount of energy for a short time. Although new advances in this field have been achieved, most common type of batteries is hardly able to... 

A Flying Electric Generator (FEG) can be a wind turbine which operates at high altitudes, where there is a continuous fast flow of air and converts wind energy to electrical power.The related field is an interdisciplinary area and is mostly related to the Aerospace Engineering and Energy Conversion. We focused on Iran, as one of the few lands in the northern hemisphere that has a high overall amount of high altitude wind energy for at least half of the year over it, according to the information of atlas of airborne wind energy in this work.So to install the FEGs in Iran, we had to find, places with a safe aerial space overhead which grant us reliable spots over country. These places found by... 

The present study was aimed at developing a model to optimize the sizing of wind turbines according to the region’s wind condition and the capital costs of each part of the turbine. The proposed model, which consists of technical aerodynamic, economic and optimization sub-models, is used to achieve maximum annual energy production by a fixed cost of a single or a number of wind turbines. A cost model has been used to determine the detailed cost of the turbine’s components. The model’s results are presented for two regions in Iran, Khaf and Ahar, and the optimized configurations for a single turbine and a wind farm have been investigated.A case study for the region- Manjil that has some... 

Regarding the range of power in small wind turbine ,the manufacturing cost is very important to produce it feasible . so cost factors should be considered in control strategy. small wind turbine operate at lower wind speed because they are located where the energy is needed rather than where the wind is high for example in residential or rural area in lower height. In these condition wind speed are changing more because of lower height .so the maximum power point tracking algorithm should have a fast dynamic. In order to have lower number of device there are no sensor for wind or generator’s speed .only the voltage and current of different part of the system is measured.
here the aim... 

Recently wind turbines with vertical axis attract attention of world’s scientific society to itself because of many reasons such as: ability to work in areas with high turbulency, structural simplicity, independency from wind direction, easy maintenance and low capital cost. So that major part of recent researches in context of wind turbines are about these turbines. In this project a small sample of wind turbine from darrieus type have been designed, manufactured and finally important parameters such as Pitch Angle, Blade numbers and Aspect Ratio have been investigated. Darrieus turbine with 4 Blades and Pitch Angle of +15° was the most appropriate sample between the test samples. In the... 

The ultimate aim of this research is optimizing high- performance Horizontal Axis Wind Turbine (HAWT) associated with using Computational fluid dynamics (CFD) to predict the flow behavior over wind turbine blades. Computational prediction of the flow over wind turbines is a challenging numerical problem because of the complicated aerodynamics and large variation in length scales. Phenomena such as; the unsteady flow, vortex shedding of the blade tips, flow separation, complicated blade geometry due to variable twist and chord and changes in angle of attack, and highly turbulent flow over blade sections makes CFD prediction challenging, as well as interesting. The goal is to gain an in depth... 

Aeroelasticity analysis and prediction of wind turbines sturcture deformations are fundamental parts in their design. Increasing the size of wind turbine blades and development of Mega-watt sized wind turbines have enhanced the importance of these studies. In this study, the aeroelasticity analysis of a wind turbine blade has been done based on flexible multibody dynamics method. For this purpose, the modal approach has been used for modeling blade structure which has been considered as a flexible beam with bending and torsion degrees of freedom. The unsteady vortex lattice method has been used to calculate aerodynamic loads in order to combine with wind turbine blade structure model. Using... 

Nowadays because of population growth and limitation of fossil fuels for power generation purpose, utilization of renewable energy sources has become highlighted. According to the geographical situation for use of wind energy, since some areas of Iran are in suitable conditions the manufacture of wind turbines and installation in wind farms has been under development recently. Monitoring the performance and operation of turbines and wind farms is an inevitable matter. Because of the suitable geographical location of Iran and pursuant to fair wind potential sites widespread this country, this phenomenon requires some backgrounds in many aspects to be achieved. One of the most important... 

This project aims to evaluate the performance of turbine generators of various kinds that are used in Manjil wind farm, based on the measured results over a period of operation and comparing them with simulation results of the same turbine generators. It also contains a comparative study with newer types of variable speed. The results of this study can be useful to examine the actual results of operation and design characteristics of the existing turbine, and also the possible advantages of using variable speed wind turbines at Manjil wind farm. Other goal of this project is to evaluate the performance of wind farm thorough turbines’ simulation results and measured result of plant’s fiders... 

Today, renewable energies such as solar and wind power are replaced to fossil fuel. Wind turbines are two categories; horizontal axis and vertical axis. Vertical axis turbines are not dependent on wind direction and since equipments are installed at the bottom of these turbine towers, maintenance is easy. Among vertical axis turbines, performance of darrieus turbine is better. The aim of this thesis is, analysis and preliminary designing of 1-kilowatt darrieus wind turbine, based on climate of the country, for using in urban environments or areas where there is no economic justification for development of power grid systems. In this regard, statistical data base is made up of vertical axis... 

In power system operation, the term "operation planning" carries a wide range of meaning. For some utilities, operation planning denotes primarily short-term planning tasks (up to several days), such as load forecasting, unit commitment, hydro-thermal coordination, transaction pricing, fuel allocation, and security analysis while for other companies operational planning is interpreted in a wider context, and include mid-term planning activities (up to several months), such as maintenance planning, fuel budgeting, rate forecasting, network planning, relay coordination, etc. The mid-term planning provides the link between the long-term and short-term planning programs. The duration of this... 

Nowadays Aeroelasticity is one of most important branch of aerospace science. The Aeroelastic analysis and get on aeroelastic safety margin, is one of the major steps that must be taken in flying crafts design. Diverse software have been developed for this purpose. Due to the increasing the demands of use of composite materials in aircraft structures, need to examine the effect of various parameters such as angles and stacking sequence on the aeroelastic instability (flutter and divergence) composite aircraft structures is determined. The analysis of wind turbines as a means of extracting energy from the wind and having a large diameter blades, causing the interference effects of aerodynamic... 

The development of wind turbine blades model that accurately predict wind turbine thrust in a full range of applicable wind speed has provided a powerful and reliable source for simulation of horizontal axis wind turbine power and thrust force that serves as a valuable tool for wind turbine design and performance analysis. A single-element blade model that reduces the rotor blade characteristics to a lift and drag coefficient vs. angle-of-attack formulation was found to describe accurately the rotor characteristics over a wide operating range. Measurements of wind speed and altitude of wind turbine installation location, rotor speed, and provided thrust is within less than 2% over a wide... 

Nowadays, the structural health monitoring is considered as an essential element in improving the performance of the structures. The role and importance of the issues in this area have been reached to the point that different ideas and policies are developed for the safety margin over the useful life of the structures. To analyze more accurately, a real model of a turbine blade is required. This issue would be taken into more consideration when the scale of the turbine gets larger. Changing of the design philosophies over time results in effective changes in the design process and maintenance procedures. Any single of these inspections has different importance according to users' demands. In...