Sharif Digital Repository

Microbiologically Influenced Corrosion (MIC) of concrete sewer ptpes and wastewater collection systems has been reported in many places of the world. Recently, numerous copper compounds have been used for bacterial growth control in sewer pipes. In this thesis, bath parameterswere optimized in order to maximize copper osmosis to the porous concrete matrix.Concrete pipes were electrochemically coated inCopper Lactate bath in a constant current mode (1=0.6 A), while temperature was set to 25, 50, 75 and 95
°Cand pH to 9,10 and 11. Specimens were then characterized by scanning electron

microscopy, optical microscopy, XRD andAAS. Copper Osmosis was highest in pH=9 and... 

Ni-SiC nanocomposite coatings are considered as corrosion resistant coatings with better tribological properties. In order to get superior properties, the amount of added particles should be increased. But high concentration of particles has some drawbacks such as low adhesion to substrate, probability of cracking in coating due to heat expansion coefficient difference between substrate and coating and also embrittlement of coating and low elasticity. In this study, the possibility of producing Ni-SiC nanocomposite coatings with FGM structure was investigated. SiC particles concentration was 5 to 80 g/l and the current density was between 3 to 5 A/dm¬2. The pH of bath and temperature was... 

In this project, nonocrystalline nickel coatings with grain sizes within the range of 9-27 nanometers were produced on yellow-brass plates by electroplating in a modified Watts bath applying current densities from 2 to 6 A/dm2 and bath stirring speeds from 0 to 400 rpm. To determine crystallite size, X-ray diffraction technique (XRD) was utilized; it was observed that grain size declined continuously with increase in current density and then in bath stirring speed. The experimental results coming from XRD tests were compared with a theoretical model in order to verify their reliability; the obtained curve indicated a good correspondence between the experimental data and the theoretical... 

Transparent coatings with self-cleaning property in visible light spectrum, UV radiation resistance and antimicrobial are highly desirable. Titanium dioxide (TiO2) is used in this research has been widely studied as an efficient photocatalyst by researchers. In this research enhanced visible-light photocatalytic activity is gained with N and Ag co-doped titania. All samples were annealed at 450℃. Finally AgI was loaded TiO2 coating and the results were investigated. Peaks of XRD pattern wereattributed to different diffraction planes of anatase TiO2. Morphology of coatings were analyzed with using FE-SEM. Nano granis size of TiO2 and AgI loaded TiO2 were observed in FE-SEMimages. Nitrogen... 

Zirconia toughened alumina (ZTA) Nanocomposites were prepared using nano sized Zirconia (ZrO2) powders doped with 3% mol of yttria (Y2O3) nanopowders and the sintering behavior at different temperature (1450 °C, 1550 °C and 1650 °C) were studied. The ZTA composite with different amount of partially stabilized Zirconia (PSZ)(5, 10, 15 and 20% mol) were prepared via axial pressing and then sintered to achieve maximum densification. After that phase changes of the samples were monitored. SEM was used for microstructural study and hardness and fracture toughness were determined by means of Vickers indentation. X-ray diffraction pattern showed that at constant composition, tetragonal zirconia... 

There are many techniques that have been used to create hydroxyapatite nanoparticles coating on nanotubes. Electrophoretic deposition (EPD) is one of the methods that has advantages of short formation time, needs simple apparatus, little restriction of the shape of substrate, no requirement for binder burnout as the green coating contains few or no organics. In the research, first, titanium dioxide nanotubes were fabricated by anodic oxidation. Anodizing voltage effect on the morphology of nanotubes was evaluated. SEM images was shown that in the anodizing voltage 20V, nanotubes were the most regular. Then, Hydroxyapatite nanoparticles has been deposited onto nanotublar TiO2 by... 

Because of limitation of titania coating that can act as self-cleaning surface under UV light irradiation, introduction of transition metal ions into titania lattice can decrease band gap energy of titania in order to activate the coating under visible light irradiation. In this research, by using vanadium element and silica prelayer, a titania coating was deposited on the soda-lime glass substarte to produce self-cleaning surface. The scope of coating was to increase the photocatalytic activity and hydrophilicity of vanadium doped titania coating on the soda-lime glass and silica coated glass by sol-gel dip coating method. XRD and FTIR analysis were done on the powders with different... 

At the first stage, chitosan-hydroxyapatite-multiwalled carbon nanotube (CH-HA-MWCNT) composite coatings were synthesized by electrophoretic deposition technique (EPD) on Ti6Al4V and 316L stainless steel substrates at different levels of pH and characterized by X-ray diffraction (XRD), Raman spectroscopy, FTIR and field emission scanning electron microscopy (FESEM). A smooth distribution of HA and MWCNT particles in a chitosan matrix with strong interfacial bonding was obtained. At the second stage, effect of pH and MWCNT content of the suspension on corrosion behavior and mechanism of deposition were studied. Potentiodynamic polarization and electrochemical impedance spectroscopy (EIS)... 

In this study, the photocatalytic activity and hydrophilicity of coat improved using Nitrogen and Vanadium elements as dopant in TiO2 coating. By using vanadium and nitrogen elements and silica prelayer, a titania coating was deposited on the soda-lime glass substrate by sol-gel dip coating method to produce self-cleaning surface. XRD and FTIR analyses were done on the powders after heat treating at in 450˚C for 30 min. XPS analysis was done for investigation of N replacement in titania structure. The band-gap energy of formed anatase was derived using UV-Vis analysis. The coating morphology and thickness were also investigated by SEM. Hydrophilicity of coatings was determined by measuring... 

The aim of this project is to load analgesic drug; Paracetamol on dental implant. The implant is titanium alloy (Ti-6Al-4V). There are two kinds of samples of anodized and HA coated onto anodized. They are in the shape of the sheets in this study. The electrodeposition and anodization carried out in order to treat the two samples. Nanotubes were formed during anodic oxidation of the samples in the 1M Ammonium sulfate (NH₄)₂SO4 and 5wt% Ammonium fluoride NH4F electrolyte. They are expected to play role of carrier for the model drug; paracetamol. The results showed that HA anodized Ti-6-4 has the ability to hold higher amounts of drug and also can keep the drug for a longer time than the... 

Metallic implants are useful in dental and orthopedic applications. Bio coating is necessary to improve bio-compatibility and bio-activation of metallic implants. For this goal, HA is the most important material. In this research, the goal is to improve bio-compatibility of St. St 316 by coating HA, HA-ZrO2, HA-TiO2, HA-ZrO2-TiO2 using combination of electrodeposition and electrophoretic methods. To form HA, calcium and phosphor salt solution was used then ZrO2- TiO2 nanoparticles was added to solution. In order to analyst the coatings different tests were done. Thickness analysis, XRD, FT-IR, FE-SEM and EDS, bonding Strength, Polarization test, bio-compatibility and surface roughness... 

Electroless coating is a chemical reduction process which depends on the catalytic reduction. In this study, the influences of different concentrations, stirring rate, pH and heat treatment of Al2O3 and SiO2 Nano sized particles in the bath on deposition rate, hardness, wear resistant, surface morphology and corrosion behavior of the Ni-P-Al2O3-SiO2 composite coatings have been investigated. The microstructure was investigated by field emission scanning electron microscopy (FESEM) and among the nanoparticles SiO2 and Al2O3 have drawn attention due to their high hardness, availability, particles distribution and reduced cost. The amount of Al2O3 and SiO2 was examined by Energy Dispersive... 

Considering the importance of biocompatibility of implantable prothesis’, metallic alloys have weaker corrosion resistance than ceramics. In order to extend usage of nanomaterials to improve the bio-properties of materials, Nano-structured ceramic coatings are being suggested to improve corrosion resistance and biocompatibility of prosthesis. Meanwhile, very good properties of TiN, such as corrosion resistance and mechanical properties as a thin film coating are undeniable. In this study, TiN and Ti2N thin film were deposited on Ti-based substrate, using PVD and Magnetron sputtering at different argon to nitrogen ratio. The crystal structure of the films was examined using Grazing XRD... 

Using of solar spectrum because of its potential for producing green energy is the topic of interest in Current decade. The goal of current research is increment of efficiency by using of a single layer and double layer semiconductor TiO2 – ZnO coating that has been synthesized by sol-gel process, which have anti-reflation and self-cleaning properties that in short time and long time for durability of solar systems can be useful. In first step of this research the single layer TiO2 (by 85nm thickness, measured by FE-SEM) and ZnO (by 65nm thickness) coating with different concentrations of pore forming agents ( plironic f127 for TiO2 and CTAB for ZnO) in coating sol examined and observed... 

In this project Ni-SiC nanocomposite coatings were electrodeposited using Watts nickel bath with addition of SiC particles to the bath. Optimization of Ni-SiC electrodeposition parameters was done using Response Surface Methodology (RSM). At specific conditions, 67 Vol% of 10nm SiC is incorporated in nickel electrodeposits which is unique and not yet reported. Study nanomechanical properties of these coatings using Nanoindentation method, it was realized that the dislocation density is increased as force increasing which is in agreement with increasing intensity of (220) and (200) reflections and intensity attenuation of (111) reflection. Nanoscratch tests show that these... 

Silver is a resistant metal against the oxidation under normal atmospheric conditions, but it reacts readily with sulfur bearing species in the environment and corrodes. Alloying silver with more noble elements, such as Palladium, is a promising approach for increasing corrosion resistance against the sulfur pollutants. The purpose of this research is to develop a plating bath for deposition of Silver-Palladium alloy with acceptable appearance and higher corrosion resistance than pure silver. For this purpose, a bath based on thiosulfate complexing agent was investigated. In this solution, with a bath containing 10 mM of each cation, deposits with palladium content of 6, 11 and 14 % were... 

One of the ways that corrosion control is presented is the use of coatings that have good properties such as high adhesion, impact resistance, ultraviolet radiation, and so on. They also have other unique properties like anti-corrosion property. To achieve coatings with these advanced properties, they use special properties of nanocomposites. Nanocomposites can add or improve one or more properties to coating properties.In the present study, we tried to first synthesize NanoDiamond/Polyaniline hybrid nanoparticles in different percentages and then use this hybrid in epoxy ester coating. To characterize this hybrid, various analyzes such as FE-SEM, TEM, FT-IR, UV-Visible, TGA and XRD were... 

In this thesis Blackening of electroless nickel-phosphorous coating and the effect of TiO2 anti-reflection coating on optical properties of coating was investigated. In the first step, electroless nickel coatings with different amounts of phosphorous on 1050 aluminium substrate deposited. In second step, blackening of coatings by chemical and electroche-mical methods have studied and in final step, effect of TiO2 antireflection coatings with different amount of Pluronic F127 on the optimum black surface and properties of coating investigated. Chemical blackening performed in nitric acid and effect of acid concenteration, Blackening time and temperature studied. optimized condition was... 

Solid oxide fuel cells are used to convert solid-state energy to direct electrical current by electrochemistry mixing a gas fuel and an oxidant in an oxide electrolyte. One of the most interesting aspects of this field for the researchers is the reaction between the metal interconnect and the glass sealant. In the current research, deposition of the YSZ coating onto the metal interconnect in order to impede the reaction with glass sealant and prohibition of its oxidation in oxidizing/reducing environment in high temperature, was mainly investigated. Effect of applying YSZ Thin layer in the intersection of Crofer steel and glass sealant on strength and chemical durability of these two... 

Tack coat is a layer of asphaltic materials, which is used for binding the surface layer to the current asphalt layer. The appropriate interlayer bonding condition will help different layers form a monolithic structure to resist traffic. The lack of proper interlayer bonding result in slippage between pavement layers, decrease the capability for transferring the load to the underlying layers, rutting, crescent cracking and decreasing the life of the Overlay. This study intends to model a pavement system in three dimensions with ABAQUS software in order to evaluate the amount of shear stress at the interface of asphalt layers. In order to prove the validity of the model, the results of the...