Sharif Digital Repository

Here in, for the first time, we report a new and simple procedure for preparing reduced graphene oxide/nickel-cobalt double layered hydroxide composite on the nickel foam (Ni-Co LDH/rGO/NF) via a fast and simple two-step electrochemical method including potentiostatic routes in the presence of CTAB as a cationic surfactant. Graphene oxide coated nickel foam prepared by simple immersion method. After that, the prepared electrode reduced electrochemically to obtain rGO/NF electrode. Finally, the rGO/NF electrode was used as cathode for electrodeposition of Ni-Co LDH in the presence of CTAB as cationic surfactant. The prepared electrodes were characterized by field emission scanning electron... 

Metal-organic framework (MOF) based graphene oxide (GO) recently merits of attention because of the relative correspondence of GO with metal ions and organic binding linkers. Furthermore, introducing the GO to the Co-MOF to make a new nanoporous hybrid have are improved the selectivity and stability of the Co-MOF. Here the graphene oxide/cobalt metal organic framework (GO/Co-MOF) was synthesized by a solvothermal process using cobalt salt and terephthalic acid and used for biocidal activity, against the growth of the Gram-negative Escherichia coli and Gram-positive Staphylococcus aureus bacteria. X-ray diffraction, Fourier transform infrared spectroscopy and Raman spectroscopy were confirmed... 

A high performance asymmetric supercapacitor (ASC)has been fabricated by using nickel oxide-cobalt oxide nanosheets (NiO–CoO NSs), which were directly grown on carbon nanotubes (CNTs)and hydrothermal carbon spheres (HTCs)as positive and negative electrodes, respectively. Both electrode materials are binder-free prepared by using a catalytic chemical vapour deposition (CVD)approach followed by a facile hydrothermal method for cathode and a one-step environmental-friendly route called hydrothermal carbonization for anode. Using NiO–CoO NSs@CNTs and HTCs, which were directly grown on Ni foam, not only leads to a very small equivalent series resistance, but also provides an impressive capacitive... 

Synthesis of efficient, low-cost, and stable bifunctional electrocatalysts with earth-abundant resources for electrochemical water electrolysis is a challenging subject for large-scale energy conversion processes. Herein, we report a high-performance electrocatalyst based on vanadium oxysulfide/cobalt-cobalt sulfonitride (VOS/Co-CoSN) for oxygen and hydrogen evolution reaction (OER and HER). The Co-CoSN film was synthesized on a copper sheet (CS) by a facile electrodeposition method. Then, VOS was electrochemically grown onto the Co-CoSN@CS electrode at various deposition times. At the optimal deposition time (300 s), the obtained VOS-300/Co-CoSN catalyst was studied for OER and HER in... 

A highly controllable, green, and rapid strategy is demonstrated for fabricating of highly sensitive non-enzymatic glucose sensing platforms. Carbon nanohorns (CNHs) were decorated onto the screen-printed electrodes. Binary nickel-cobalt sulfide (NiCo-S) nanosheets (NSs) were then deposited on CNH-casted electrodes by a facile and scalable method. Following detailed structural characterization and the electrocatalytic activity of the fabricated NiCo-S/CNH electrodes towards electro-oxidation of glucose was examined in detail. The proposed electrodes operated within two distinct linear dynamic ranges of 0.001- 0.330 mM and 0.330 - 4.53 mM with sensitivities of 1842 µA.mM−1.cm−2 and 854... 

The dearth of efficient, robust, and economical electrocatalysts for water oxidation is dubiously the key obstacle for renewable energy devices, so synthesis of efficient, and cost-effective metal-based water oxidation catalysts is vital. Herein, Co3O4, Co9S8 catalysts and their heterostructure Co3O4/Co9S8 were synthesized and evaluated as water oxidation electrocatalysts. The characterization of Co3O4, Co9S8, and Co3O4/Co9S8 electrocatalysts was performed using Fourier transform infrared spectroscopy, scanning electron microscopy and X-ray diffraction techniques. The heterostructure Co3O4/Co9S8 (1.46 V) exhibited water oxidation electrocatalysis at extremely low onset potential compared to... 

There has been a growing demand for materials with superior absorption capabilities, such as strong absorbing capacity, thin thickness, and light weight, to solve challenges related to EM radiation pollution. While the majority of the research is focused on optimizing material compositions, component microstructure and absorber structure are also critical factors for improving microwave absorption performance. In this research, we show how the microstructure of components and absorber design may increase dissipation features. Solvothermal and hydrothermal methods were utilized for synthesizing mesoporous CuS micro-particles with a 3D hierarchical structure as a dielectric component and... 

High-performance textile-based energy storage systems with high energy and power densities alongside remarkable cyclic life are always at the leading edge of wearable electronics. Herein, commercial cotton fabrics (CCFs) are used as the substrates for the fabrication of ultra-light, high-performance wearable supercapacitors. Hierarchical microstructures of nickel-cobalt sulfide (Ni-Co-S) decorated single-walled carbon nanotubes (SWCNTs) are used as the positive supercapacitor electrodes. Enhanced electrochemical performance with a specific gravimetric capacity of 331 Cg−1 (at a current density of 0.3 Ag−1) is obtained from these Ni-Co-S@SWCNT@CCF electrodes. Besides, composites of graphene... 

In this study, graphene materials have been synthesized with solid camphor (C10H16O) and methane gas as carbon precursors using atmospheric pressure chemical vapor deposition (CVD) technique at a temperature range of 900-1000 °C for a period of 45 min over copper nanoparticles. Influence of the carbon precursors upon the shape, number of layers and yield of the synthesized graphene samples has been investigated. In this venue, the compounds synthesized were functionalized with oxygen groups and impregnated by cobalt and molybdenum active phases. Moreover, the total metal loading and Co/Mo weight ratio of prepared compounds were adjusted to their industrial nominal values of 10% and 0.33,... 

Insufficient electrocatalytic activity for oxygen reduction/evolution in lanthanum strontium ferrite (LSF) perovskites at temperatures below 700 °C, limits the utilization of these Co-free oxides as oxygen electrodes for intermediate-temperature solid oxide fuel/electrolysis cells (SOFC/SOEC). Marked performance improvement is here reported by decorating the surface with Pr2Ni1-xCuxO4 catalyst particles. Infiltrating porous LSF electrodes with aqueous nitrates solutions containing Pr, Ni and Cu, targeting the compositions Pr2Ni0.7Cu0.3O4 and Pr2Ni0.6Cu0.4O4, significantly reduces the polarization resistance at 650 °C from 0.98 Ω cm2 to 0.16 Ω cm2 and 0.13 Ω cm2 respectively. Electrical... 

Monometallic and bimetallic supported metal oxides catalysts on γ-alumina were prepared by heterogeneous deposition-precipitation. The γ-alumina used as a support was synthesized by the sol-gel and the co-precipitation methods. Supports and catalysts were characterized by Brunauer–Emmett–Teller (BET) surface area, X-ray diffraction (XRD), field-emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS). The performance of the prepared catalysts was studied for total oxidation of toluene in air at different relative humidity and oxidation temperatures. Efficiency of bimetallic catalysts for deep oxidation of toluene was... 

In this study, crumpled-shape nanocomposite of nitrogen and sulfur co-doped ZnO–CeO2 (NSZC) was deposited on FTO substrate using one-step ultrasonic spray pyrolysis. Zinc acetate, cerium nitrate, and thiourea were dissolved in deionized water and used as starting solution. The samples were characterized using FESEM, XRD, UV–vis spectroscopy, EIS, and PL. The as-prepared nitrogen and sulfur co-doped ZnO–CeO2 nanocomposites were evaluated as high photocatalysts for degradation of methyl orange. Nearly 100% photocatalytic degradation of methyl orange was achieved for 180 min. The photoluminescence and electrochemical impedance spectroscopy revealed that co-doping of nitrogen and sulfur could... 

The phase-pure multiple ternary or quaternary metal selenides in energy boosting, have not been reported yet. Here, self-supported porous crystalline Zn–Ni–Co/Cu selenides microballs arrays were constructed by selenation of the designed tubular Cu(OH)2 arrays decorated with ultrathin Zn–Co–Ni tri-metallic hydroxide on carbon cloth substrate. For this rational engineering, a novel precursor sample was firstly prepared by conversion of deposited Cu layer to hollow tubular Cu(OH)2 arrays on carbon cloth, then, Zn-Co–Ni layered ternary hydroxides with a thin layer structure was deposited around this tubular arrays. The selenation with an exciting morphology change from amorphous tube to highly... 

TiO2 nanotube arrays (TNA) have been modified by cobalt phosphate (CoPi) through potentiostatic electrodeposition method. Different samples have been prepared by changing the loaded CoPi through the deposition time from 10 to 960 min. Formed catalytic materials have been characterized by different methods. Although charge transfer resistance of the CoPi/TNA photoanodes have been decreased from 5.5 to 4.0 kΩ by increasing the deposition time from 5 to 60 min, the maximum photoresponse was obtained for 10 min CoPi deposition leading to 24% more photocurrent compare to bare TNA which proposed optimum value for cobalt phosphate decoration. Based on field emission scanning electron microscopy... 

Effective utilization of solar energy is an urgent global issue for solving current environmental problems and the energy crisis. A challenging issue in water splitting for solar fuel production is developing high performance and scalable photo/electro catalysts using low cost approach. Here, CoO x nanostructures were grown on anodized TiO 2 nanotube arrays (TNAs) by amperostatic electrodeposition method as oxygen evolution reaction (OER) photoanodes. The effects of electrodeposition current density and deposition time on the growth of so-called nanostructures were investigated based on photoelectrochemical (PEC) measurements and structural characterizations. X-ray diffraction patterns of... 

Two new macrocyclic ligands Ln (L and L′) bearing two fluorophore naphthalene moieties were synthesized and characterized by employing 1H and 13C NMR, IR, microanalysis as well as mass spectrometry. Comparative studies on the effect of assorted metal cations as Cr(III), Cu(II), Zn(II), Cd(II), Pb(II), Na(I), Ni(II), Co(II), Ba(II), Fe(II), Al(III), Mg(II), Cs(I), Ca(II), Hg(II), K(I), Mn(II), Ag(I), Fe(III) on fluorescence and UV–vis spectra of Ln in ethanol illustrated that both of the macrocycles were sensitive and selective fluorescence chemosensors for Al(III). Remarkable binding constant values as 1.36 × 105 M−1 and 1.15 × 105 M−1 alongside 1:1 stoichiometry for Al(III)/L and Al(III)/L′... 

Two new macrocyclic ligands Ln (L and L′) bearing two fluorophore naphthalene moieties were synthesized and characterized by employing 1H and 13C NMR, IR, microanalysis as well as mass spectrometry. Comparative studies on the effect of assorted metal cations as Cr(III), Cu(II), Zn(II), Cd(II), Pb(II), Na(I), Ni(II), Co(II), Ba(II), Fe(II), Al(III), Mg(II), Cs(I), Ca(II), Hg(II), K(I), Mn(II), Ag(I), Fe(III) on fluorescence and UV–vis spectra of Ln in ethanol illustrated that both of the macrocycles were sensitive and selective fluorescence chemosensors for Al(III). Remarkable binding constant values as 1.36 × 105 M−1 and 1.15 × 105 M−1 alongside 1:1 stoichiometry for Al(III)/L and Al(III)/L′... 

High-performance supercapacitors that merit superior power and energy densities, as well as long-term cycle durability are always of great significance as a building block of energy storage devices. Herein, an innovative strategy is developed to design hierarchical and unique porous structures of ternary metal sulfide nano-flake decorated porous hydrothermal carbon microspheres. Hierarchical microspheres of ternary zinc-cobalt sulfide nanosheet (NS) decorated biomass derived hydrothermal carbon spheres (HTCSs) are directly employed as the positive supercapacitor electrodes. In addition, composites of pyrolyzed polyaniline nanotubes (PPNTs) and iron oxide, receiving advantages from highly... 

In this study, for the first time, we reported a fast and facile three-step in situ strategy for direct controllable growth of the Co3(BTC)2 MOFs thin films on the GCE, through the rapid conversion of the electrodeposited Co(OH)2 nano-flakes on rGO/GCE, to crystalline rectangular bar-shape structures of MOFs. X-ray diffraction spectroscopy, Fourier transform infrared spectroscopy, field emission scanning electron microscopy, energy dispersive X-ray spectroscopy and elemental mapping analysis used to the structural and morphological characterization of the well-synthesized MOFs. The as-prepared Co3(BTC)2 MOFs were used to construct a non-enzymatic sensing platform for determining the glucose... 

Oxidative cyanation of sp3C–H bonds at the α position of amines was achieved using CoCuFe2O4 as a catalyst and NaCN as an inexpensive cyanide source at room temperature. CoCuFe2O4 was found to be an active catalyst for Csp [3]-Csp coupling, efficiently delivering valuable α-aminonitriles from tertiary/secondary amines in good yields. The corresponding products were obtained with high selectivity toward α position. In addition, functional group tolerance offered the opportunity for application in late-stage functionalization of biologically active molecules. This transformation proceeds convenient on a gram-scale, and the catalyst can be reused for several runs with consistent catalytic...