Sharif Digital Repository

Polymeric like carbon (PLC) films are grown by a capacitance coupled RF-PECVD on the grounded electrode at room temperature from liquid gas (40% propane and 60% butane) in two regimes with nitrogen and without nitrogen gas. Films are characterized by X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), Fourier transform infrared (FTIR) absorption and Raman spectroscopy. The result of FTIR analyses indicates that more than 90% of hydrogen atoms are bonded to carbon with sp 3 hybridization. The abundance of CH 3 is more than that of CH 2 and this one is more than that of CH for carbon with sp 3 hybridization in these films. The C 1s line of the XPS spectra is deconvoluted to... 

In this contribution, reduced grapheme oxides (rGO) with immobilized tin oxide (SnO2) nanocatalysts were synthesized via the Incipient Wetness Impregnation (IWI) method. To characterize the SnO2/rGO composites, several analyses including the; XRD, Raman, FTIR, ICP-OES, BET-BJH, XPS, TEM, and TPD were utilized. Then the effects of parameters including reaction time, total metal loading, and the initial sulfur concentration of model fuel in the dibenzothiophene (DBT) oxidation desulfurization process were evaluated. After determining the optimal conditions for the aforementioned parameters, the influences of 3 effective factors of the molar ratio of oxidant/substrate (O/S), the molar ratio of... 

The present study aims to convert waste cooking oil (WCO) into biodiesel via phosphomolybdic acid (H3PMo12O40, PMA) supported on Clinoptilolite as a novel green acid catalyst through an electrolysis procedure. The prepared catalysts were characterized by XRD, FTIR, FESEM, EDS, Elemental map, and TEM analyses. The effect of four independent variables on biodiesel yield including methanol to oil molar ratio (6:1–14:1), catalyst weight (2–5 wt%), time (3–5 h), and voltage (15–35 V) was optimized and evaluated by the response surface methodology (RSM) employing central composite design (CCD). The maximum value of biodiesel yield was 96% under the optimal conditions, including the methanol to oil... 

Ca-doped Ni–Mg–Mn spinel ferrites with compositions of Ni0·5Mg0·3Mn0.2CaxFe2-xO4 (x = 0, 0.1, 0.2, 0.3, 0.4, 0.5) were prepared via sol-gel auto-ignition technique. TGA/DTA, FTIR, XRD, FESEM, and VSM were employed to evaluate the thermal, spectral, structural, morphological, and magnetic features of Ca-doped Ni–Mg–Mn spinel ferrites. TGA/DTA curves show the weight loss in the sample. This weight loss was attributed to the oxidation and decomposition of the sample contents at a temperature of 500 °C. XRD reveals a single-phase structure of the Ni–Mg–Mn nano ferrites. A single-phase orthorhombic structure was confirmed for Ca-doped Ni–Mg–Mn ferrites. Structural parameters such as lattice... 

For the efficient removal of some anionic dyes, a novel adsorbent was developed. The adsorbent was prepared by coating a synthetic polymer on magnetite nanosphere surface as a magnetic carrier. The synthesized nano-adsorbent was fully characterized using Fourier transform infrared spectroscopy (FT-IR), vibrating sample magnetometer, X-ray diffractometer, scanning electron microscope, and transmission electronic microscopy measurements. The synthesized nano-adsorbent showed high adsorption capacity towards removal of some anionic dyes (221.4, 201.6, and 135.3 mg g-1 for reactive red 195, reactive yellow 145, and reactive blue 19 dye, respectively) from aqueous samples. The dye adsorption was... 

The synergistic effect of nano titanium dioxide (10 and 30 nm) and nano silver (10 nm) as antibacterial agents were investigated on UV curable clear coating. Antibacterial and physical-mechanical properties of coating were optimized using experimental design in response surface method. Twenty different samples of nano Ag and nano TiO2 were prepared in this method. Antibacterial properties on Gram-negative bacteria (Escherichia coli) were investigated. The results revealed that using equal amounts of two sizes of nano TiO2 promote the antibacterial activity of nano Ag. So, the coating shows strong activity against E. coli. Physical-mechanical properties such as surface hardness, abrasion... 

A drug delivery system based on poly (vinyl alcohol) (PVA) hydrogels containing ibuprofen-loaded poly (lactic acid) (PLA) microspheres was developed to improve the release kinetics of this model drug. Gamma-irradiation and freeze-thawing were applied to prepare poly (vinyl alcohol) hydrogels. Properties and morphology of these composite hydrogels were investigated using FTIR, DSC, and SEM. In vitro release indicated that entrapment of the microspheres into the PVA hydrogels causes a reduction in both the release rate and the initial burst effect. PLA microspheres entrapped into the PVA hydrogels showed more suitable controlled release kinetics for drug delivery  

Hydrolysis of titanium isopropoxide alcoholic solution has been used to prepare the crystallized TiO2 nanoparticles at low temperature. Concentration ratio was used to control the pathway of sol-gel process and change the physical characteristics of TiO2 nanopowders. The crystallinity, morphology and size of aged TiO2 nanopowders were studied by X-ray diffraction and Scanning Electron Microscopy (SEM). FTIR and, Thermo-Gravimetric (TG) analysis were used to identify the functional groups and thermal behavior of prepared samples. Experimental results have shown that high crystalline TiO2 nanomaterial with anatase polymorph can be obtained at room temperature. It has been found that the... 

ZnFe2O4 nanoparticles have been successfully prepared through a controlled microwave-assisted co-precipitation. X-ray Diffraction (XRD), Fourier Transform Infrared Spectroscopy (FT-IR), Scanning Electron Microscopy (SEM) and Vibrating Sample Magnetometer (VSM) were used for the structural, morphological and magnetic investigation of the product. SEM micrographs of ZnFe2O4 nanopowder also reveal that nanoparticles have spherical shape. Average particle size was obtained as 12 nm from XRD. Catalytic activity of ZnFe2O4 nanopowder for O-acylation of alcohol and phenol has been investigated. A trace amount of ZnFe2O4 has been effectively used as a nanocatalyst for the acylation of alcohol and... 

In this study hydroxyapatite (HA)/zirconia/alumina composite coatings on titanium metal was carried out using Sol-Gel dip coating and calcination process. Hydroxyapatite-Alumina-Zirconia sol, coated samples in three processes by changing final sol stirring time, aging time, calcination temperature of synthesized powder and prepared coating and rate of coating. Some parts of prepared sol were also synthesized and became powder in all three processes. Scanning electron microscopy was used to estimate the particle size of the surface and for morphological analysis. The functional group and crystallization characteristics of the powders were analyzed using (FTIR) and X-Ray diffraction (XRD).... 

A sonochemistry-based synthesis method was used to produce nanocrystalline nickel oxide powder with ∼20 nm average crystallite diameter from Ni(OH)2 precursor. Ultrasound waves were applied to the primary solution to intensify the Ni(OH)2 precipitation. Dried precipitates were calcined at 320 °C to form nanocrystalline NiO particles. The morphology of the produced powder was characterized by transmission electron microscopy. Using sonochemical waves resulted in lowering of the size of the nickel oxide crystallites. FT-IR spectroscopy and X-ray diffraction revealed high purity well-crystallized structure of the synthesized powder. Photoluminescence spectroscopy confirmed production of a wide... 

The main purpose of this study is to prepare and characterize hydroxyapatite (HA)-10%wt bioglass (BG) composite nanopowders and its bioactivity. Composites of hydroxyapatite with synthesized bioglass are prepared at various temperatures. Suitable calcination temperature is chosen by evaluating of the phase composition. X-ray diffraction (XRD), Transmission electron microscopy (TEM) and Scanning electron microscopy (SEM) techniques are utilized to characterize the prepared nanopowders. The bioactivity of the prepared composite samples is evaluated in an in vitro study by immersion of samples in simulated body fluid (SBF) for predicted time. Fourier transformed infrared (FTIR) spectroscopy and... 

Using a combined hydrothermal and sol-gel route, TiO 2 -capped ZnO nanoparticles with an average size of 60 nm were prepared. The titania shell was amorphous with a thickness of ∼10 nm. Formation of Zn 2TiO 4 phase at higher calcination temperature was noticed. Effects of Ti/Zn molar ratio and coating time on the thickness of TiO 2 shell and the photoactivity of the particles for decolorization of Methylene Blue (MB) under UV lamp irradiation (3 mW/cm 2) were investigated. The nanoparticles were characterized by X-ray diffraction, transmission electron microscopy, fourier-transform infrared spectrometry (FTIR), diffuse reflectance spectroscopy (DLS), and atomic absorption spectroscopy.... 

In this study, we attempt to synthesize novel acrylated agarose (ACAG)-based hydrogels with three different crosslinking densities. Acrylate groups were inserted onto agarose (AG) backbone through homogeneous reaction of acrylic monomers with AG backbone. Hydrogels were synthesized through radical copolymerization of a mixture of acrylic acid and 2-hydroxyethyl acrylate with ACAG in aqueous solution using ammonium persulfate as an initiator. Infrared spectroscopy (FTIR) was carried out to confirm the chemical structure of the hydrogel. Moreover, morphology of the samples was assessed by scanning electron microscopy. The equilibrium swelling capacities of synthesized hydrogels were evaluated... 

In the current study, for the first time, photochemical facile green synthesis of salep capped silver nano-wedges was reported via the wet chemical synthesis procedure. Sunlight-UV as an available reducing agent caused mild reduction of silver ions to the silver nano-wedges. Salep as an effective capping/shaping polysaccharide bioresource material was used in the reaction medium and caused creation of flower-like self-assembled structures of the silver nano-wedges. The formation of silver nano-wedges and their flower-like self-assembled structures was confirmed by SEM technique. Further investigations were carried out using UV-vis, FTIR, GPC and XRD data. The prepared silver nano-wedges... 

The surface defluorination of Teflon in powdery form was performed using a chemical treatment. The reaction parameters including the reaction time, sodium, naphthalene concentrations were optimized using a Taguchi method to obtain maximum functionality on the particles surface. The surface functionality of the treated particles was analyzed by FTIR, energy dispersive X-ray analysis (EDX) and surface energy. Both treated (g-PTFE) and untreated (PTFE) Teflon were added to polyamide 66 (PA66) at various loadings up to 6 wt%. Mechanical, differential scanning calorimetry (DSC) and tribological analyses for different PA66/Teflon composites were carried out. The chemical treatment enhanced the... 

Novel types of highly swelling hydrogels were prepared by grafting crosslinked polyacrylamide-co-poly-2-acrylamido-2-methylpropane sulfonic acid (PAAm-co-PAMPS) chains onto sodium alginate (Na-Alg) through a free radical polymerization method. The superabsorbent formation was confirmed by Fourier transform infrared spectroscopic (FTIR). The controlled release behavior of diclofenac sodium (DS) from superabsorbent polymer was factinvestigated, and shown that the release profiles of DS from superabsorbent polymer were slow in simulated gastric fluid (SGF, pH 1.2) over 3 h, but nearly all of the initial drug content was released in simulated intestinal fluid (SIF, pH 7.4) within 21 h after... 

In the current work, synthesis of an environmental-sensitive superabsorbent hydrogel using γ-rays is described. Grafted polyacrylonitrile onto a homogeneous solution of starch and kappa-Carrageenan hybrid backbones created a smart material with reversible behavior. The reaction parameters (i.e. acrylonitrile, starch and kappa-Carrageenan concentration, as well as γ-irradiation time) affecting the. water absorbency of the. hydrogel were optimized using the. Taguchi method, in order to achieve a hydrogel with high swelling capacity. FTIR spectroscopy was used for confirming the. structure of the final product and the morphology of the synthesized hydrogel was examined by a scanning electron... 

In this study, a fast and sensitive flow injection μ-solid phase extraction (FI-μ-SPE) technique based on an electrospun polyaniline (PANI) nanocomposite in conjunction with gas chromatography-mass spectrometry (GC-MS) was developed. The PANI-based nanocomposite was synthesized by electrospinning of a solution containing polyvinyl alcohol (PVA)/PANI. The majority of PVA template was subsequently removed from the whole PVA/PANI nanofibers blend by exposing the electrospun nanocomposite to hot water. The homogeneity, porosity and characterization of the electrospun nanofibers were investigated by the scanning electron microscopy (SEM) and Fourier transform infrared (FT-IR) spectroscopy. Due to... 

Selective catalytic reduction (SCR) of NOx by NH3 over a series of Mn–M/Z catalysts (M = Cr, Mn, Fe, Co, Ni, Cu, Zn, and Z = the ZSM-5 Zeolite) synthesized by wet impregnation method was investigated. Mn–Fe/Z, Mn–Co/Z, and Mn–Cu/Z catalysts exhibited approximately 100 % NOx conversion over a wide temperature range (200–360 °C) in a defined atmospheric condition, which was noticeably greater than that of Mn–Cr/Z (340–360 °C). Furthermore, the effect of addition of second metal oxide species to the initial Mn/Z catalyst on the structure of catalysts was studied by several characterization techniques. BET measurements revealed high surface area and pore volume of the Mn–Cu/Z catalyst. In...