Sharif Digital Repository

A modelling of the anaerobic digestion process of molasses was conducted in a 70-L multistage anaerobic biofilm reactor or hybrid anaerobic baffled reactor with six compartments at an operating temperature of 26 °C. Five hydraulic retention times (6, 16, 24, 72 and 120 h) were studied at a constant influent COD concentration of 10,000 mg/L. Two different kinetic models (one was based on a dispersion model with first-order kinetics for substrate consumption and the other based on a modification of the Young equation) were evaluated and compared to predict the organic matter removal efficiency or fractional conversion. The first-order kinetic constant obtained with the dispersion model was... 

The analysis of the capture zone of wells is useful to design pumping systems and wellhead protection programs. In this study, an analytical solution for the head distribution of a partially penetrating well, and semi-analytical methods to determine the geometry of the capture surface are presented. The analytical solution is derived based on an infinitesimal radius under a constant pumping rate in a two-zone confined aquifer. Using the developed solution, a sensitivity analysis is performed to study the influence of skin on the drawdown, location of the stagnation point, maximum horizontal and vertical extent of the capture surface. The results show the efficiency of a partially penetrating... 

Modeling the water flow in cohesive fracture is a fundamental issue in the crack growth simulation of cracked concrete gravity dams and hydraulic fracture problems. In this paper, a mathematical model is presented for the analysis of fracture propagation in the semi-saturated porous media. The solid behavior incorporates a discrete cohesive fracture model, coupled with the flow in porous media through the fracture network. The double-nodded zero-thickness cohesive interface element is employed for the mixed mode fracture behavior in tension and contact behavior in compression. The modified crack permeability is applied in fracture propagation based on the data obtained from experimental... 

Due to the nonlinear dynamics of hydraulic systems, applying high performance closed-loop controllers is complicated. In this paper, a single-rod hydraulic actuator is considered in which load displacement (for positioning purposes) is controlled via manipulation of the input voltage to the servo-valve. Dynamics of the servo-valve is described by first and second order transfer functions (named as Models 1 and 2). Through linearization of the system around its operating points, dynamics of the hydraulic actuator is represented in the state space. A full-order observer is designed for on-line states estimation. Then, feedback control system is designed for both regulation and tracking... 

The objective of this study is the investigation of formaldehyde degradation in a bioreactor with pumice stone as a support. The reactor was tested at different synthetic wastewater concentrations with total COD of 500, 1000 and 1500 mgL, respectively, at 24 h hydraulic retention time. The effect of feed composition was tested by changing the COD TCOD FA ratio in order to analyze the impact of formaldehyde concentration. The average formaldehyde and COD removal efficiencies obtained in the reactor were 97.1% and 88%, respectively. The maximum COD and formaldehyde removal efficiencies occurred at the COD TCOD F of 41 at COD T=1000mgL. The effect of toxic shock on reactor performance was... 

The distribution of water fluxes is strongly influenced by the properties of the media adjacent to the cathode catalyst layer (CCL), viz. polymer electrolyte membrane (PEM) and gas diffusion media (GDM). We propose a model that is applied under varying humidification of the cathode feed gas, with water removal in liquid and vapor form. The model warrants the definition of a critical current density up to which water removal out of the CCL could proceed completely via vapor diffusion to the cathode side. Above the critical current density, excessive water generation leads to the build-up of an excess liquid pressure in the CCL, which drives hydraulic fluxes to PEM and GDM sides. Experimental... 

In the present research, the effect of residual stress distribution on the static strain aging (SSA) phenomenon in cold rolled steel was investigated. A three-dimensional model was employed to evaluate the residual stress distributions within the rolled strips, and hole drilling experiments were also performed to verify the data obtained from the mathematical model. Hardness and tensile tests were then performed on the cold rolled samples at different temperatures and aging periods, and the results of these tests were utilised to assess SSA behaviour after different rolling programs. The results show that SSA occurs within the cold rolled steel in the employed aging period, and its kinetics... 

Side weirs are frequently used in many water projects. Due to their position with respect to the flow direction, side weirs are categorized as plain, oblique and labyrinth. One of the advantages of an oblique side weir is the increase in the effective length of the weir for overflowing and, therefore, diverting more discharge with the same channel opening, weir height and flow properties (i.e., upstream discharge, upstream Froude number and so on). In this paper, an experimental set-up of a new design of an oblique side weir with asymmetric geometry has been studied. The hydraulic behavior of this kind of oblique side weir, with a constant opening length, different weir heights and... 

When the number of labeled data is not sufficient, Semi-Supervised Learning (SSL) methods utilize unlabeled data to enhance classification. Recently, many SSL methods have been developed based on the manifold assumption in a batch mode. However, when data arrive sequentially and in large quantities, both computation and storage limitations become a bottleneck. In this paper, we present a new semi-supervised coarse graining (CG) algorithm to reduce the required number of data points for preserving the manifold structure. First, an equivalent formulation of Label Propagation (LP) is derived. Then a novel spectral view of the Harmonic Solution (HS) is proposed. Finally an algorithm to reduce... 

In this study, the flow patterns of air-water, two-phase flows have been investigated experimentally in a vertical mini pipe. The flow regimes were observed by a high speed video recorder in pipes with diameters of 2,3 and 4 mm and length 27, 31 and 25 cm, respectively. The comprehensive visualization of air-water, two-phase flow in a vertical mini pipe has been performed to realize the physics of such a two-phase flow. Different flow patterns of air-water flow were observed simultaneously in the mini pipe at different values of air and water flow rates. Consequently, the flow pattern map was proposed for flow in the mini-pipe, in terms of superficial velocities of liquid and gas phases. The... 

Stepped spillways have been widely used in Roller Compacted Concrete (RCC) dams in the recent decades. Considering complexity of hydraulics of stepped chutes, their initial design involves pre-selection of some empirical formulae for calculation of flow characteristics and design parameters. In this paper, accuracy of several empirical formulae, proposed for calculating locations of aeration inception (LI), uniform flow (Lu) and rate of energy dissipation (ΔH/Hmax), were compared in relation to results of physical model tests of four stepped spillways and the preferred formulae, providing least amounts of relative errors, were identified. Such a feedback will be helpful for improvement of... 

Flood as a natural disaster causes heavy human and economic losses and social unrests in most areas of the world. As flood control cost and flood damage compensation is a heavy burden over countries' budget, traditional flood design methods are being replaced by more reliable risk-based methods employing comprehensive risk analysis. In this respect, flood damage estimation is an important step in flood control systems design and analysis. In large river basins with complex reservoir systems and various land uses, flood damage estimation is complex, data-intensive, time demanding, and uncertain task requiring an intensive hydrologic and hydraulic analysis. In this study a simple approach is... 

In this paper, a mathematical model is presented for the analysis of dynamic fracture propagation in the saturated porous media. The solid behavior incorporates a discrete cohesive fracture model, coupled with the flow in porous media through the fracture network. The double-nodded zero-thickness cohesive interface element is employed for the mixed mode fracture behavior in tension and contact behavior in compression. The crack is automatically detected and propagated perpendicular to the maximum effective stress. The spatial discretization is continuously updated during the crack propagation. Numerical examples from the hydraulic fracturing test and the concrete gravity dam show the... 

Geotextiles are one of the most widely used synthetic materials in filtration and drainage applications. Since in real applications, geotextiles are subjected to various hydraulic gradients and confining stresses, hydraulic behavior of geotextiles under different circumstances is of great practical importance. In this study filtration and drainage properties of several nonwoven needle-punched geotextiles with different properties and unit mass per area of 200g/m2, 400g/m2, 500g/m2 and 800g/m2, under various confining stresses and hydraulic gradients, were studied using standard permittivity and transmissivity equipments. Prepared samples were subjected to hydraulic heads in the range of 10cm... 

Novel unbreakable solid phase microextraction (SPME) fiber coatings were fabricated by electrospinning method in which the polymeric solution was converted to nanofibers using high voltages. Four different polymers, polyurethane (PU), polycarbonate (PC), polyamide (PA) and polyvinyl chloride (PVC) were prepared as the fiber coatings on thin stainless steel wires. The extraction efficiencies of new coatings were investigated by headspace solid-phase microextraction (HS-SPME) of some environmentally important chlorobenzenes from aqueous samples followed by gas chromatography-mass spectrometry (GC-MS) analysis. Among them, PU showed a prominent efficiency. Effects of coating time and polymer... 

In this paper, application of the Endurance Time (ET) method in seismic analysis of concrete gravity dams has been investigated. The ET method is based on time history analysis of structures, subjected to specially designed intensifying acceleration functions. It is expected that by developing its application in analysis of concrete dams, useful information on the seismic behavior of such dams at various excitation intensities can be obtained. Results from linear analysis of Folsom and Koyna dams under real earthquakes and ET acceleration functions have been compared. It is shown that the ET method can predict the response of concrete gravity dams to individual earthquakes with reasonable... 

This paper addresses the numerical simulation of thermo-fluid characteristics of triangular jets. The results of spatially developing, three dimensional jets from isosce-les and equilateral nozzles at different Reynolds numbers and distances between jets are presented. The system of governing equations, subject to the proper boundary condi-tions is solved with the finite volume method with collo-cated grid arrangement. SIMPLEC algorithm was used for the pressure-velocity coupling to discrete the governing equations of flow and energy. The turbulent stresses are approximated using k-ε model. The velocity and tempera-ture fields are presented and rates of their decay at jet cen-terline are... 

In the present study, methods for improving the hydraulic performance of labyrinth side weirs in a rectangular channel are reported based on model experimentation. For this purpose different arrangements and configurations of groups of guide vane plates and piles in the side weir flow field were tested. Experiments were conducted on labyrinth side weirs of different lengths and sill heights fitted in the test section of a rectangular glass-walled channel. Depths of flow were measured in both longitudinal and crosswise directions at regular intervals and their profiles were studied. It was found that the discharge coefficient of the labyrinth side weirs under these conditions gave... 

In this study, static strain aging behaviour of cold rolled steel strips was considered with emphasis on the distribution of residual hydrostatic stress developed during temper rolling. In order to assess residual stress distribution produced by the temper rolling, a three-dimensional model was first employed. Then, samples were rolled at a reduction of 4% under single and double pass rolling programmes and the kinetics of static strain aging phenomenon as well as the required activation energies were then evaluated using hardness and tensile tests on the deformed samples. Considering the predicted residual hydrostatic stress distribution, it was found that tensile hydrostatic stresses... 

The structure of turbidity currents released on a sloping bed below fresh water is investigated. Kaolin is used as a suspended material. Laboratory observations indicate that if a dense layer moves through the channel, the current thickness increases due to a hydraulic jump. This phenomenon occurs under special inlet conditions and has a significant effect on the current structure including velocity profile, current height and bed shear stress. Flows with different inlet Froude numbers based on various inlet concentrations behave more distinctly than those based on different inlet opening heights. Laboratory experiments indicate that an increase in the inlet Froude number causes an increase...