Sharif Digital Repository

Fluxgate magnetometers with different design and core materials have been made. The sensors have been characterized and the frequency responses of the sensors have been measured. The fluxgate magnetometer based on orthogonal design and amorphous wire core working in fundamental mode reaches 30pT/Hz noise level and 40μV/nT sensitivity. Finally an active magnetic shield constructed based on the amorphous core fluxgate magnetometer reaches more than 60dB field attenuation for DC field and has a good response for frequencies below 100Hz  

This paper presents the prototype design and fabrication of a magnetically actuated miniature pump that utilizes self-sealing capability of ferrofluid-covered permanent magnets in both pumping and valving mechanisms. The valving action is performed by employing one active valve along with two nozzle/diffuser elements. Two cylindrical permanent magnets are placed inside the flat-wall channels: One magnet acts as the active valve and the other one serves as a reciprocating piston actuating the working fluid. In order to seal the gaps between the channel walls and the permanent magnet of the valve/piston, ferrofluid is used to cover the surfaces of both magnets. The valve and the piston are... 

The effect of bulging of domain wall (DW) on the magnetoresistance (MR) is investigated. With taking into account the auto-correlation between the points of the interface, one can formulate the mobility within the relaxation time approximation scheme. The results show that the bulging of DW, evaluated with the commonly accepted magnetic parameters for typical ferromagnetic materials of Co, Fe and Ni, has a countable role into the MR  

The purposes of this paper are determination of the current density and safety factor profiles, J(r) and q(r), in IR-T1 tokamak. For these purposes, a diamagnetic loop with its compensation coil, and also an array of magnetic probes were designed, constructed, and installed on outer surface of the IR-T1 tokamak chamber, and then the poloidal beta and poloidal and radial magnetic fields measured. Moreover, a few approximate values of the internal inductance for the different possible profiles of the plasma current density are also calculated. From the results, current density and q-profiles obtained  

A novel, magnetic nanocarrier was successfully synthesized through a facile and economical producer in which Fe3O4 magnetic nanoparticles were coated by starch-g-poly (methyl methacrylate-co-PEG-acrylamide). The surface of nanocarrier was then modified by hydrazine to preparation of a pH-responsive carrier. The resulted nanocarrier was applied for delivery of doxorubicin (DOX) as an effective anti-cancer drug. DOX was reacted with hydrazine linkage on the surface of nanocarrier to form hydrazone bond. Due to the presence of numerous hydrazine groups on the surface of magnetic nanocarrier large amounts of DOX was loaded onto the carrier (327 mg g−1). © 2016 The Korean Society of Industrial... 

A magnetic actuation system is a promising tool for untethered manipulation at the microscale that medical treatment can benefit from. This paper proposes a new magnetic actuation system that comprises of two coaxial coils on a rotary table. A fixed workspace is placed between coils. The proposed system is able to generate magnetic force with desired direction and magnitude in a plane. The conducted simulation and experiment confirm the capability of the proposed system to control the position of the microrobot. © 2019 IEEE  

We have studied the ground-state phase diagram of a two-leg spin ladder with anisotropic ferromagnetic leg couplings under the influence of a symmetry-breaking transverse magnetic field by the exact diagonalization technique. In the case of antiferromagnetic coupling between legs we identified two phase transitions in the plane of magnetic field versus interchain coupling strength. The first corresponds to the transition from the gapped rung-singlet phase to the gapped stripe-ferromagnetic phase. The second represents the transition from the gapped stripe-ferromagnetic phase into the fully polarized ferromagnetic phase. © IOP Publishing Ltd  

Magnetic hyperthermia (HT) using biocompatible ceramics is a ground-breaking, competent, and safe thermo-therapeutic strategy for cancer treatment. The magnetic properties of bioceramics, along with their structure and synthesis parameters, are responsible for the controlled heating of malignant tumors and are the key to clinical success. After providing a brief overview of magnetism and its significance in biomedicine, this review deals with materials selection and synthesis methods of bioceramics/glasses used for HT. Relevant research carried out on promising bioceramics for magnetic HT, with a focus on their size, shape, surface functionalization, magnetic field parameters, and in... 

Magnetic hyperthermia (HT) using biocompatible ceramics is a ground-breaking, competent, and safe thermo-therapeutic strategy for cancer treatment. The magnetic properties of bioceramics, along with their structure and synthesis parameters, are responsible for the controlled heating of malignant tumors and are the key to clinical success. After providing a brief overview of magnetism and its significance in biomedicine, this review deals with materials selection and synthesis methods of bioceramics/glasses used for HT. Relevant research carried out on promising bioceramics for magnetic HT, with a focus on their size, shape, surface functionalization, magnetic field parameters, and in... 

XFe2O4 magnetic nanoparticles (X = Mn, Fe, Co, Ni, and Zn) were prepared by using two methods: coprecipitation and hydrothermal. The synthesized nanoparticles were compared according to the separation in an external magnetic field and finally, the hydrothermal method was specified as a better synthesis method. The magnetic nanoparticles were characterized by physico-chemical analysis methods such as Vibrating Sample Magnetometer (VSM), X-ray diffraction (XRD), Fourier Transform Infrared spectroscopy (FTIR), nitrogen adsorption-adsorption isotherm and Transmission Electron Microscopy (TEM). Magnetic properties of synthesized nanoparticles were studied by ab-initio theoretical methods to... 

Functionalized magnetic core–zeolitic shell nanocomposites were prepared via hydrothermal and precipitation methods. The products were characterized by vibrating sample magnetometer, X-ray powder diffraction, Fourier transform infrared spectroscopy, nitrogen adsorption–desorption isotherms, and transmission electron microscopy analysis. The growth of mordenite nanocrystals on the outer surface of silica-coated magnetic nanoparticles at the presence of organic templates was well approved. The removal performance and the selectivity of mixed metal ions (Pb2+ and Cd2+) in aqueous solution were investigated via the sorption process. The batch method was employed to study the sorption kinetic,... 

A magneto-photothermal therapy for cancer (in vitro photothermal therapy of prostate cancer cells and in vivo photothermal therapy of human glioblastoma tumors in the presence of an external magnetic field) was developed using superparamagnetic zinc ferrite spinel (ZnFe2O4)-reduced graphene oxide (rGO) nanostructures (with various graphene contents). In vitro application of a low concentration (10 μg mL-1) of the ZnFe 2O4-rGO (20 wt%) nanostructures under a short time period (∼1 min) of near-infrared (NIR) irradiation (with a laser power of 7.5 W cm-2) resulted in an excellent destruction of the prostate cancer cells, in the presence of a magnetic field (∼1 Tesla) used for localizing the... 

This work presents an experimental study of the effect of a magnetic field on laminar forced convection of a ferrofluid flowing in a tube filled with permeable material. The walls of the tube are subjected to a uniform heat flux and the permeable bed consists of uniform spheres of 3-mm diameter. The ferrofluid synthesis is based on reacting iron (II) and iron (III) in an aqueous ammonia solution to form magnetite, Fe3O4. The magnetite is mixed with aqueous tetra methyl ammonium hydroxide, (CH3) 4NOH, solution. The dependency of the pressure drop on the volume fraction, and comparison of the pressure drop and the temperature distribution of the tube wall is studied. Also comparison of the... 

Superparamagnetic ZnFe2O4/reduced graphene oxide (rGO) composites containing ZnFe2O4 nanoparticles (with ∼5-20 nm sizes) attached onto rGO sheets (with ∼1 μm lateral dimensions) were synthesized by hydrothermal reaction method. By increasing the graphene content of the composite from 0 to 40 wt%, the size as well as the number of the ZnFe2O4 nanoparticles decreased and the saturated magnetization of the composites reduced from 10.2 to 1.8 emu/g, resulting in lower responses to external magnetic fields. Concerning this, the time needed for 90% separation of ZnFe2O4/rGO (40 wt%) composite from its solution (2 mg/mL in ethanol) was found 60 min in the presence of an external magnetic field (∼1... 

In this research FeCl2/FeCl3/Perlite magnetic nanoparticles (FeCl2/FeCl3/PMNs), as a novel magnetic nanocomposite adsorbent was used for the removal of green malachite (GM) dye from aqueous solution in a batch and fixed bed column. Firstly, FeCl2/FeCl3/PMNs adsorption properties were investigated. Therefore, the solution of FeCl2·4H2O and FeCl3·6H2O by ratio 2/1 was mixed with perlite nanoparticles. The study investigates the effect of process parameters such as pH, adsorbent dosage, contact time and GM dye initial concentration. Next, GM dye was quantitatively evaluated by using the Langmuir, Freundlich and BET isotherms and pseudo-first- and pseudo-second-order kinetic model. The... 

The effects of applied magnetic and electric fields on electrospinning were investigated to produce more efficient nanofibers. Considering the previous extensive studies, polyamide nanofibers were prepared by a conventional approach and under auxiliary electric and magnetic fields. The first sorbent was synthesized by electrospinning of a solution of 18% polyamide in formic acid. The second and third types of polyamide were prepared similarly while the electrospinning processes were assisted by an electric and a magnetic field. The third type of polyamide contained a magnetic ionic liquid (MIL) to induce sufficient magnetic susceptibility in the polymeric solution. The SEM images revealed... 

Introduction: Interindividual variations in regional structural properties covary across the brain, thus forming networks that change as a result of aging and accompanying neurological conditions. The alterations of superficial white matter (SWM) in Alzheimer's disease (AD) are of special interest, since they follow the AD-specific pattern characterized by the strongest neurodegeneration of the medial temporal lobe and association cortices. Methods: Here, we present an SWM network analysis in comparison with SWM topography based on the myelin content quantified with magnetization transfer ratio (MTR) for 39 areas in each hemisphere in 15 AD patients and 15 controls. The networks are... 

In this study, the reusability and process stability of nano-reengineered horseradish peroxidase was investigated in a fluorescence-based sensing system for hydrogen peroxide determination as a model application. To this end, dendron macromolecules were attached to the enzyme surface through bio-conjugation techniques. The resulting enzyme-polymer nanoparticles, with an average size of 14(±2) nm, showed significant life time and thermal stability. For enzyme recovery and reusability purposes, the enzyme-polymer nanoparticles were labelled with magnetic nanoparticles with a labelling yield of 90 %. These labelled enzyme molecules showed significant process stability, i.e., up to 7 recycling... 

In this study, the kinetics of nanocrystallization of amorphous Fe 73.5Si13.5B9Nb3Cu1 (F1) and Fe77Si11B9Nb2.4Cu0.6 (F2) alloys is investigated. The microstructure and magnetic properties of the nanocrystalline alloys are compared. The crystallization temperature of F2 alloy is shifted towards lower temperatures with respect to F1. Thus, the crystalline volume fraction and the crystalline grain size at specific annealing temperature for the F2 alloy are higher than for the F1 alloy, accounting for the higher coercive force of F2 alloy with respect to the one of F1 alloy. According to isoconversional methods, the activation energy for crystallization is variable as a function of transformed... 

Utilizing an extended two-flavor Nambu-Jona Lasinio (NJL) model, we review some of the effects of external magnetic fields on two-flavor color superconducting phase (2SC) at moderate baryon densities in the QCD phase diagram. The effective action of the extended NJL model consists of two mass gaps as functions of three intensive quantities, the temperature, the quark chemical potential and the external magnetic field. The nonzero values of the mass gaps, chiral and diquark condensates, induce spontaneous chiral and color symmetry breaking, respectively, and as a result two different phases of quark matter appear. We find the transition curves between these phases as well as the critical...