Sharif Digital Repository

Hydrolysis kinetics of the lead silicate glass (LSG) with 40 mol% PbO in 0.5 N HNO3 aqueous acid solution was investigated. The surface morphology and the gel layer thickness were studied by scanning electron microscopy (SEM) micrographs. Energy dispersive X-ray spectroscopy (EDS) and inductively coupled plasma spectroscopy (ICP) were used to determine the composition of the gel layer and the aqueous solution, respectively. The silicon content of the dissolution products was determined by using weight-loss data and compositions of the gel layer and the solution. The kinetic parameters were determined using the shrinking-core-model (SCM) for rate controlling step. The activation energy... 

Despite tremendous efforts toward vaccination, influenza remains an ongoing global threat. The induction of strain-specific neutralizing antibody responses is a common phenomenon during vaccination with the current inactivated influenza vaccines, so the protective effect of these vaccines is mostly strain-specific. There is an essential need for the development of next-generation vaccines, with a broad range of immunogenicity against antigenically drifted or shifted influenza viruses. Here, we evaluate the potential of whole inactivated vaccines, based on chemical and physical methods, as well as new approaches to generate cross-protective immune responses. We also consider the mechanisms by... 

Herein, the CO methanation reaction is studied over Ni/Fe–Al mixed oxides with various Fe and Al contents. The mesoporous nanocrystalline supports are prepared by a novel sol–gel process using propylene oxide as a gelation agent. The deposition–precipitation method is used for the deposition of nickel on the catalyst support. The samples are characterized by Brunauer–Emmett–Teller (BET), X-ray diffractometry (XRD), temperature programmed reduction (TPR), temperature programmed oxidation (TPO), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The results indicate that increasing the iron content and reducing the Al percentage in the catalyst support reduces the... 

Persian Gulf is a semi-enclosed highly saline reverse estuary that is exposed to the risk of oil spills in offshore oil and gas activities. In the early 2000s, a specific version of NOAA's Trajectory Analysis Planner (TAP II) was developed for Persian Gulf to assist regional organizations in preparing oil spill contingency plans. In this research, a new stochastic model is developed to cover the limitations of TAP II. The new model is based on an advanced trajectory model, which is now linked with high resolution spatiotemporal data of the wind and sea current. In a case study, the developed model is compared with TAP II, and evaluated by multiple tests designed for analysis of uncertainty,... 

In this research, surface modification of aromatic polyamide thin film composite (TFC) reverse osmosis (RO) membranes was carried out using dielectric barrier discharge (DBD) plasma treatment to improve the performance and fouling resistance of prepared RO membranes. First, polyamide TFC RO membranes were synthesized via interfacial polymerization of m-phenylenediamine and trimesoyl chloride monomers over microporous polysulfone support membrane. Next, the DBD plasma treatment with 15 s, 30 s, 60 s, and 90 s duration was used for surface modification. The surface properties of RO membranes were characterized by attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR),... 

In this research, surface modification of aromatic polyamide thin film composite (TFC) reverse osmosis (RO) membranes was carried out using dielectric barrier discharge (DBD) plasma treatment to improve the performance and fouling resistance of prepared RO membranes. First, polyamide TFC RO membranes were synthesized via interfacial polymerization of m-phenylenediamine and trimesoyl chloride monomers over microporous polysulfone support membrane. Next, the DBD plasma treatment with 15 s, 30 s, 60 s, and 90 s duration was used for surface modification. The surface properties of RO membranes were characterized by attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR),... 

Low salinity waterflooding (LSWF) is a process in which by lowering the ionic strength and/or manipulation of the composition of the injection water, the long term equilibrium in oil/brine/rock system is disturbed to reach a new state of equilibrium through which the oil production will be enhanced due to fluid/fluid and/or rock/fluid interactions. In spite of recent advances in the simulation of the LSWF at core scale and beyond, there are very few works that have modelled and simulated this process at the pore scale specially using direct numerical simulation (DNS). As a result the effects of wettability alteration and/or Interfacial Tension (IFT) change on the distribution of the phases... 

Gas condensate production using technology of multi-stage hydraulically fracturing in shale gas condensate reservoirs' horizontal wells is a new topic of unconventional resources studies. Thus, shale gas condensate as a new source of energy can be considered as an important issue for development and further studies. In this work, a semi-analytical solution of gas and oil two-phase flow is presented for pressure transient analysis (PTA) and rate transient analysis (RTA) of a shale gas condensate reservoir's production data. Fluid flow assumption here is flow in a pseudo triple-porosity porous media, which are matrix, natural fractures and adsorbed gas. Adsorbed gas is a form of gas in porous... 

In this paper, a systematic investigation and modeling of all available technologies (such as NGL, injection in pipelines, LNG, GTL, NGH, and CNG plants, EOR, electricity production by thermal power plants, and water generation by MED technologies) for flare gas recovery has been developed. An optimal combination of the technologies has been proposed for flare gas recovery of five oil wells in the south of Iran with different specifications as case studies. The optimal combinations of all the technologies have been investigated with minimizing the payback period of capital costs (economical) and maximizing CO2 pollutant reduction (environmental) objective functions by using the genetic... 

Titanium does not react well with the human tissues and due to its bio-inert nature the surface modification has yet to be well-studied. In this study, the sonoelectrochemical process has been carried out to generate TiO2 nanotube arrays on implantable Ti 6–4. All the prepared nanotubes fill with the vancomycin by immersion and electrophoresis method. Drug-releasing properties, antibacterial behavior, protein adsorption and cell attachment of drug-modified nanotubes are examined by UV–vis, flow cytometry, modified disc diffusion, BSA adsorption, and FESEM, respectively. The most uniform morphology, appropriate drug release, cell viability behavior and antibacterial properties can be achieved... 

Every year, about a thousand million tires reach the end of their service life, more than half of which are disposed of in landfills. The waste tire rubber has a great potential for application as aggregate phase in production of lightweight concrete/mortar. This study is aimed at evaluating the effects of using crumb rubber (CR) as fine aggregate at replacement ratios of 0–60% (by volume) in alkali-activated slag mortars. Furthermore, polypropylene fibre (PPF) was used at 0.5% and 1% of volume of the mix to enhance the properties of mortar mixes such as flexural strength and shrinkage behaviour. The compressive strength, flexural strength, water absorption, thermal conductivity, drying... 

Nowadays, energy supply is one of the most prominent demands of countries in the world. The enhancement in energy efficiency, flexibility for applications in various industrial processes, and the reduction in the environmental impacts of pollutant emissions can be accomplished by using sustainable energy sources. Alternative procedures for heat and electricity production have been developed in the commercial and industrial sectors and focusing on the cogeneration systems, and the contribution of nuclear energy has been increased for improving processes. Nuclear reactors play an essential role in nonelectric applications, and combined heat and energy at different operating temperatures can be... 

It is vital to prevent brittle cracks in large structures. This is particularly important for a number of industry sectors including offshore wind, Oil & Gas, and shipbuilding where structural failure risks loss of human life and loss of expensive assets. Some modern steels exhibit high Charpy energy – i.e. high initiation fracture toughness, but poor resistance to crack propagation – i.e. low crack arrest toughness. The correlation between initiation and arrest toughness measured through small-scale testing is investigated in five different steels, which include S355 structural steel (with two different thicknesses), X65 pipeline steel, two high strength reactor pressure vessel steels and... 

The stability and integrity of structures under indeterminant external loadings, particularly earthquakes, is a vital issue for the design and safe operation of marine and offshore structures. Over the past decades, many structural control systems, such as viscous-based systems, have been developed and embedded in marine and offshore structures, particularly oil platforms to maintain the stability and mitigate the seismic hazards. Rapid improvement in intelligent materials, including shape memory alloys (SMAs) and Magnetorheological fluid (MRF), have led to the design and development of efficient structural control elements. The present work aims to establish a framework for the structural... 

A model for prediction of corrosion of mild steel in aqueous solutions containing carbon dioxide is proposed. In this model, formation of protective corrosion product is not yet considered, species concentration at the surface was calculated by using molecular diffusion phenomena and the diffusion equations were solved using the finite difference method. Calculated electrochemical currents at the steel surface may be used to determine the corrosion rate. The model was verified experimentally under atmospheric pressure and the effect of parameters, such as liquid velocity and pH, was investigated. The model can predict the electrochemical reaction rates when they were controlled by diffusion... 

Dynamic vibration absorbers are used to reduce the undesirable vibrations in many applications such as electrical transmission lines, helicopters, gas turbines, engines, bridges, etc. Tuneable vibration absorbers (TVA) are also used as semi-active controllers. In this paper, the application of a TVA for suppression of chatter vibrations in the boring manufacturing process is presented. The boring bar is modeled as a cantilever Euler-Bernoulli beam and the TVA is composed of mass, spring and dashpot elements. In addition, the effect of spring mass is considered in this analysis. After formulation of the problem, the optimum specifications of the absorber such as spring stiffness, absorber... 

In this study, we have proposed a novel method investigates MR-Images for normal and abnormal brains which effected by Alzheimer's Disease (AD) to extract 336 number of different features based on texture analysis. Before applying this algorithm, we have to use a registration method because of variety in size of normal and abnormal images. Consequently, the output of Texture Analysis System (TAS) is a vector containing 336 elements that are features extracted from texture. This vector is considered as the input of the Artificial Neural Network (ANN) which is feed-forward one. The features extracted from the Gray-level Co-occurrence Matrix (GLCM) have been interpreted and compared with normal... 

Purpose: This study aimed to investigate the biomechanical impact of laminectomy on cervical intersegmental motion and load sharing using a parametric patient-specific finite element (FE) model towards providing clinicians with a viable quantitative tool for informed decision-making and improved surgical planning. Methods: Ten subject-specific nonlinear osteo-ligamentous cervical spine (C3–C7) FE models were developed using X-ray image-based algorithms. The models were used to evaluate the effect of laminectomy on lower cervical spine biomechanics for two-level (C3–C4) and three-level (C3–C5) laminectomy procedures. Results: The average cervical spine ranges of motion (ROM) for the pre-op... 

Chitosan is a natural polymer with acceptable biocompatibility, biodegradability, and mechanical stability; hence, it has been widely appraised for drug and gene delivery applications. However, there has been no comprehensive assessment to tailor-make chitosan cross-linkers of various types and functionalities as well as complex chitosan-based semi- and full-interpenetrating networks for drug delivery systems (DDSs). Herein, various fabrication methods developed for chitosan hydrogels are deliberated, including chitosan crosslinking with and without diverse cross-linkers. Tripolyphosphate, genipin and multi-functional aldehydes, carboxylic acids, and epoxides are common cross-linkers used in... 

Choosing the right location for the sustainable development of offshore wind energy plays an important role in the success of renewable projects. In this regard, in the present study, a new application of the hybrid Fuzzy-SWARA & Fuzzy-WASPAS method was presented to prioritize the suitable area for developing offshore wind projects. For a case study, five regions with high potential for offshore wind energy in the Persian-Gulf have been investigated. Economic assessment was evaluated using the Levelized Cost of energy method. Evaluation of offshore wind farms has been analyzed from various aspects including technical, economic, social, environmental and risk. The SWARA was used for weighting...