Sharif Digital Repository

In the present study, the effects of Sr and Mg were investigated on mechanical and biological properties of 58S bioactive glass (BG). SiO2-P2O5-CaO BG with different contents of Sr and Mg were synthesized via the sol-gel method and immersed in simulated body fluid (SBF) for several days to explore their biocompatibility. Precise analyses of the BG using X-ray powder diffraction, scanning electron microscopy, and transmission electron microscopy showed that the Mg-doped BG containing 8 wt % MgO possessed better biocompatibility. It was also found that mechanical properties of the BG could be improved by increasing the amounts of MgO and SrO. Both 5Sr-BG and 8Mg-BG samples did not exhibit any... 

Prior studies were conducted in an isolated manner for the use of glass powder (GP) either as ordinary Portland cement (OPC) replacement material in blended cement or as a precursor in AAM material. There was no reported literature that made a direct comparison on the properties of blended cement and AAM containing GP with an equivalent mix composition. The present study was aimed to evaluate and compare the effects of GP as a partial precursor on properties of both OPC and alkali-activated slag (AAS) mortars. For this purpose, cement and ground granulated blast furnace slag (GGBFS) was partially replaced with 10%, 20%, 30%, and 40% (by weight) GP in OPC and AAS mortars, respectively. The... 

In this survey, a reliable and applicable Y–Y shaped micro–channel in a microfluidic device was designed and manufactured. A number of micro–scaled hedges were precisely fabricated inside the micro–channel to facilitate the immobilization of synthesized core–shell Fe3O4@SiO2 magnetic nanoparticles (MNPs), functionalized by triethoxyphenylsilane (TEPS) by sol-gel technique. Both sample and reagents were introduced into the microfluidic device by a syringe pump to perform the extraction and desorption steps. The functionalized MNPs were characterized by transmission electron microscopy, X-ray diffraction spectroscopy and Fourier transform infrared spectroscopy. By adopting the strategy of... 

In this study the influence of the molar ratios such as SiO2:Al2O3:Na2O:H2O, as well as the sand particles on the mechanical performance, shrinkage and microstructure of metakaolin based geopolymers was studied. Considering different content of the reactive silica and alumina in metakaolin, forty eight different compositions were prepared. The proper condition for achieving the highest mechanical performance as well as less structural defects by tailoring the curing condition, molar ratios and addition of sand particles are presented. Special attention was paid to the incorporation of sand particles up to 70 wt% on the microstructure, shrinkage and mechanical properties of metakaolin based... 

Simulation of brittle regime machining of materials (such as ceramics) is often difficult because of the complex material removal mechanisms involved. In this study, the discrete element method is used to simulate the dynamic process for machining of slip-cast fused silica ceramics. Flat-joint contact model is exploited to model contacts between particles in synthetic discrete element method models. This contact model is suitable for modeling of brittle materials with high ratios (higher than 10) of unconfined compressive strength to tensile strength. The discrete element method has the ability to simulate initiation, propagation, and coalescence of cracks leading to chip formation in the... 

Two main reservoir mechanisms that impact oil recovery factors are wettability alteration and interfacial tension (IFT) change. In this study, these two key mechanisms are evaluated experimentally for samples from the Asmari (carbonate) oil reservoir utilizing silica nanoparticles in the presence of low-salinity water. The nanofluid, rock formation and crude oil samples were prepared meticulously to ensure meaningful experimental could be conducted over a range of low-salinity conditions. The results show that across the range of salinities studied, the absolute value of zeta potential of nanofluids decreases with increasing total dissolved solids (TDS) in the water treated with silica... 

The separation of water-oil mixtures has attracted widespread attention because of the increasing amounts of oily wastewater produced from the daily activities of humans and different industrial processes. Therefore, the development of facile and efficient oil-water separation technologies is imperative. In this work, a new highly superhydrophilic-superoleophobic coated stainless steel mesh was fabricated using virtue of the surface modification of poly (BzVimBr-Vim)@PFOA@SiO2 nanoparticles (NPs) through a facile preparation process. The new fabricated superhydrophilic and highly oleophobic coating exhibits good adhesive properties. The oil contact angle (OCA) and water contact angle (WCA)... 

In this paper, the optimum alkali activator solution properties in alkali-activated pastes based on ground granulated blast furnace slag (GGBFS) and micro-silica (MS) were investigated. For this purpose, sodium hydroxide (NH) solutions with molarities of 8 M, 12 M, and 16 M were prepared and mixed with sodium silicate (NS) solutions at NS:NH ratios of 1.0, 2.5, and 4.0 to produce the final activator solution. Two sets of pastes were manufactured: (1) pastes based on GGBFS, and (2) pastes in which 10% by weight of GGBFS was replaced with MS. The fresh density increased with increasing NH molarity and NS:NH ratio; whereas, the final setting time reduced with an increase in the aforementioned... 

In recent decades, utilizing of water-based muds (WBMs) in drilling oil and gas wells is ever increasing comparing to oil-based muds and synthetic-based muds due to the lower environmental issues. However, the main drawbacks with WBMs are rheological properties inefficiency and shale swelling which have caused attentions turn to improvement of WBMs’ rheological properties. In this study, the effects of various nanoparticles (NPs) namely titanium dioxide (TiO2), silicon dioxide (SiO2), and zinc oxide (ZnO) on improving rheological properties and shale recovery rate of a WBM sample at two temperatures (25 and 50 °C) were investigated. The concentrations of NPs in the base mud were set at 0.01,... 

In this paper, the effect of silica nanoparticles on oil production due to the spontaneous imbibition of brine into oil-wet sandstones has been studied. The imbibed fluids were NaCl 3 wt. % solutions containing various concentrations of nanoparticles and the recovered oil for each solution was compared. The results revealed that nanoparticles yielded more oil recovery. Nanofluid was used after brine imbibition, and the oil recovery increased from 17.8% to 40% while in the case of using the same nanofluid as the first imbibed fluid the oil recovery was 53%. Also, the results indicated that the oil recovery depends on nanoparticle concentrations. © 2019, © 2019 Taylor & Francis Group, LLC  

This study is aimed at optimizing the rice husk ash (RHA) content and bacterial concentration in self-compacting concrete (SCC). For this purpose, cement was partially replaced with RHA at 0%, 5%, 10%, 15%, 20%, 25%, and 30% by weight of cement. In addition, micro-silica (MS) was added to all mixes at a dosage of 10% by weight of cementitious materials. The mix with the optimum RHA content was supplied with bacterial cells with concentrations of 103, 105, and 107 cells/ml to reduce the formation of micro-cracks. The RHA concretes showed reduced workability with increasing RHA content. Energy-dispersive X-ray spectroscopy (EDS) and scanning electron microscopy (SEM) analyses were performed on... 

The ability of an active protective organic coating to restore its protection functionality in case of a coating defect is of pivotal importance to ensure durable performance under demanding corrosive conditions. In this paper, a self-healing epoxy system is fabricated by separate encapsulation of epoxy and polyamine in carbon hollow spheres (CHSs) and the autonomous healing performance of the system applied on mild steel is investigated. CHSs were synthesized via a silica templating method using carbonization of polysaccharide shells formed on the surface of silica templates. Consequently, epoxy and polyamine were loaded in separate capsules by dispersion of CHSs into the dilute solutions... 

Application of nanoparticles for wettability alteration offers a practical approach to resolve some surface-related problems encountered in the nowadays technological process. Examples are underground/subsurface engineering implications, including the enhanced oil recovery from the oil-wet carbonate reservoirs. However, the common wettability evaluating techniques such as contact angle and flotation cannot be representative of the dynamic phenomena occurring at the pore scale and hence are unable to give accurate information about the process. Therefore, in the present work, the electrokinetic evaluations are utilized to explore the wettability alteration of initially oil-wet carbonate rock... 

A new polymer gel nanocomposite is fabricated for excess water production control (water shut off) in petroleum reservoirs and its rheological behavior is evaluated in the presence of sea water and formation water at the temperature of 100 °C. It is shown that at a high salinity without using SiO2 nanoparticles, the elastic modulus of synthesized polymer gel in the presence of sea water and formation water are 12.5 Pa and 9.8 Pa respectively. However by incorporation of SiO2 nanoparticles in the polymer gel matrix, the elastic modulus of synthesized polymer gel in the presence of sea water and formation water can be improved to 13.56 Pa and 11.57 Pa respectively, which is quite interesting... 

A new magnetically separable nanocatalyst was successfully synthesized by immobilizing of vanadyl acetylacetonate complex, [VO(acac)2], onto silica coated magnetite nanoparticles previously functionalized with 3-aminopropyltriethoxysilane (3-APTES) and reacted by 5-bromosalicylaldehyde to form Schiff base moiety. The obtained nanocatalyst was characterized by elemental analysis (CHN), FT-IR spectroscopy, Powder X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), inductively coupled plasma optical emission spectrometry (ICP-OES) and thermogravimetric analysis (TGA). Eventually, the resulting nanoparticles were used as catalyst for epoxidation of alkenes and... 

Great advantages bestowed by mesoporous silica nanoparticles (MSNs) including high surface area, tailorable pore diameter and surface chemistry, and large pore volume render them as efficient tools in biomedical applications. Herein, MSNs with different surface chemistries were synthesized and investigated in terms of biocompatibility and their impact on the morphology of bone marrow-derived mesenchymal stem cells both in 2D and 3D culture systems. Bare MSNs (BMSNs) were synthesized by template removing method using tetraethylorthosilicate (TEOS) as a precursor. The as-prepared BMSNs were then used to prepare amine-functionalized (AMSNs), carboxyl-functionalized (CMSNs) and polymeric... 

This study concentrated on the formulation of self-flowing and an energy efficient lightweight aggregate foamed concrete (LAFC) to be employed as thermal insulation, thermal mass and structural material. Low density concrete mixtures (for the density values from 800 to 1300 kg/m3) were prepared by changing the volume of lightweight expanded clay aggregate (ECA) from 49.4% to 20.1%. Flowing properties of concrete mixtures were improved with the help of stable foam. Ordinary Portland cement (OPC) was replaced by the 5% and 10% silica fume (SF) to examine the influence of SF on the properties of LAFC. Compressive strength and tensile strength of LAFC mixtures were respectively enhanced from 6.5... 

The synthesis of plate-like silica particles, which are of importance for a variety of applications, are mainly based on the widely adopted method of the sol-gel reaction of silicon alkoxides in traditional batch-wise instrumentation. In this study, continuous-flow synthesis of amorphous plate-like silica particles is reported through combining droplet-based microfluidics and the sol-gel reaction of tetraethyl orthosilicate. The reaction was conducted at the surface of oil droplets, comprising tetraethyl orthosilicate (TEOS), suspended in acidic (HCl) water, resulting in silica particles on the surface of the droplets, leaving the device with outlet flow. The synthesized particles had... 

Despite their potential applications, a limited number of studies for synthesizing vertical MoS2 nanoflakes especially via CVD have been reported so far, which generally involve tedious complex- and/or multi-step growth processes. In this study, direct synthesis of vertical MoS2 nanoflakes grown on the SiO2/Si substrate during a rapid sulfidation process by CVD method has been reported. Material characterization was performed using Raman spectroscopy, XRD and FE-SEM. The XRD results indicated the dominant phase of 2H–MoS2 within the synthesized layers. The characteristic distance between the two dominant peaks of E1 2g and A1g in the Raman spectra confirms the multi-layered structure for... 

This study presents the results of an experimental evaluation of the performance of high strength concrete (HSC)with basic oxygen steel-making (BOS)slag and nano-silica respectively used as a partial replacement of sand and cement. The properties of fresh and hardened concrete specimens containing 25%, 50%, 75%, and 100% BOS as partial replacement of sand and 2% of cement replaced with nano-silica were evaluated. According to the results, concrete samples containing nano-silica with higher BOS percentages, demonstrated improvements in strength and durability properties, while workability was reduced. For example, at 50% BOS content, about 18% increase in compressive strength and 50%...