Sharif Digital Repository

Enhancing stability against photocorrosion and improving photocurrent response are the main challenges toward the development of cupric oxide (CuO) based photocathodes for solar-driven hydrogen production. In this paper, stable and efficient CuO-photocathodes have been developed using in situ materials engineering and through gold-palladium (Au-Pd) nanoparticles deposition on the CuO surface. The CuO photocathode exhibits a photocurrent generation of ∼3 mA/cm2 at 0 V v/s RHE. Time-of-flight secondary ion mass spectrometry (TOF-SIMS) analysis and X-ray spectroscopy (XPS) confirm the formation of oxygen-rich (O-rich) CuO film which demonstrates a highly stable photocathode with retained... 

Thin-film solar cells based on hybrid organo-halide lead perovskites achieve over 22% power conversion efficiency (PCE). A photovoltaic technology at such high performance is no longer limited by efficiency. Instead, lifetime and reliability become the decisive criteria for commercialization. This requires a standardized and scalable architecture which does fulfill all requirements for larger area solution processing. One of the most highly demanded technologies is a low temperature and printable conductive ink to substitute evaporated metal electrodes for the top contact. Importantly, that electrode technology must have higher environmental stability than, for instance, an evaporated silver... 

In this paper the creation of multiple energy hubs that make up a complex energy network are modeled and optimized for a selection of six scenarios to examine both their financial viability and potential reduction of greenhouse gas emissions. As a proposed case study scenario for the model, three energy hubs are considered: a 'residential complex (RC)', a 'commercial shopping plaza (CS)', and a 'school (S)'. The use of combined heat and power systems, solar photovoltaic, solar collectors and network interaction are also examined for their impact on efficiency and cost. The modeling is undertaken and carried out by General Algebraic Modeling System (GAMS). It is shown that cost can be reduced... 

Dielectric scattering particles have widely been used as embedded scattering elements in dye-sensitized solar cells (DSCs) to improve the optical absorption of the device. Here we systematically study rodlike and spherical core-shell silica@Ag particles as more effective alternatives to the dielectric scattering particles. The wavelength-scale silica@Ag particles with sufficiently thin Ag shell support hybrid plasmonic-photonic resonance modes that have low parasitic absorption losses and a broadband optical response. Both of these features lead to their successful deployment in light trapping in high-efficiency DSCs. Optimized rodlike silica@Ag@silica particles improve the power conversion... 

Distributed generation (DG) units are often interfaced to the main grid using power electronic converters including voltage-source converters (VSCs). A VSC offers dc/ac power conversion, high controllability, and fast dynamic response. Because of nonlinearities, uncertainties, and system parameters’ changes involved in the nature of a grid-connected renewable DG system, conventional linear control methods cannot completely and efficiently address all control objectives. In this paper, a nonlinear adaptive control scheme based on adaptive backstepping strategy is presented to control the operation of a grid-connected renewable DG unit. As compared to the popular vector control technique, the... 

Distributed generation (DG) units are often interfaced to the main grid using power electronic converters including voltage-source converters (VSCs). A VSC offers dc/ac power conversion, high controllability, and fast dynamic response. Because of nonlinearities, uncertainties, and system parameters’ changes involved in the nature of a grid-connected renewable DG system, conventional linear control methods cannot completely and efficiently address all control objectives. In this paper, a nonlinear adaptive control scheme based on adaptive backstepping strategy is presented to control the operation of a grid-connected renewable DG unit. As compared to the popular vector control technique, the... 

Abstract We design a thermo-photovoltaic Tandem cell which produces high open circuit voltage (Voc) that causes to increase efficiency (η). The currently used materials (AlAsSb-InGaSb/InAsSb) have thermo-photovoltaic (TPV) property which can be a p-n junction of a solar cell, but they have low bandgap energy which is the reason for lower open circuit voltage. In this paper, in the bottom cell of the Tandem, there is 30 quantum wells which increase absorption coefficients and quantum efficiency (QE) that causes to increase current. By increasing the current of the bottom cell, the top cell thickness must be increased because the top cell and the bottom cell should have the same current. In... 

The solar collectors absorb solar irradiation and then produce thermal energy; however, they cannot generate electrical power. Electricity and thermal energy can be produced by the photovoltaic thermal module, simultaneously, while the outlet temperature of the photovoltaic thermal module is not usually high enough to provide thermal requirements of a building such as hot water or space heating. This work proposes a novel compound system created by the connection of a solar collector in series with a photovoltaic thermal module to resolve the issue of low outlet temperature in the photovoltaic thermal module and lack of electrical power in solar collectors. To examine the feasibility of this... 

Because of the low outflow temperature of the conventional photovoltaic thermal systems and lack of electrical production of the solar thermal collectors, a novel combined system is proposed to solve the two mentioned drawbacks. This novel system is achieved by connecting a photovoltaic thermal unit to a solar thermal collector in series. To increase the overall performance of this novel combined system, different hybrid nanofluids include (1) multiwall carbon nanotube-aluminum oxide (2) multiwall carbon nanotube-silicon carbide (3) graphene-aluminum oxide, and (4) graphene-silicon carbide are compared. The investigation is performed based on the three-dimensional simulation, and the... 

An energy management system (EMS) was proposed for a campus microgrid (μG) with the incorporation of renewable energy resources to reduce the operational expenses and costs. Many uncertainties have created problems for microgrids that limit the generation of photovoltaics, causing an upsurge in the energy market prices, where regulating the voltage or frequency is a challenging task among several microgrid systems, and in the present era, it is an extremely important research area. This type of difficulty may be mitigated in the distribution system by utilizing the optimal demand response (DR) planning strategy and a distributed generator (DG). The goal of this article was to present a... 

Solar systems are the most promising technologies to reduce building energy consumption. In recent years, one of the popular solar technologies is building integrated photovoltaic-thermal collectors, because of profitability and no need for separate architectural space. In this study, a new combination of glazed building integrated photovoltaic thermal solar collectors and an absorption cooling system, as a trigeneration system, to provide thermal and electrical energy demands of a case study residential building, is proposed. Dynamic simulation of the proposed system is performed using the TRNSYS-MATLAB co-simulator. Because there is no model for the glazed photovoltaic thermal solar... 

Renewable hydrogen production plays a key role in transitioning to a hydrogen economy. For this, developing countries are encouraged to keep up with industrialized nations. As such, this study seeks to evaluate the potential of all capital cities of Iran in terms of solar-based hydrogen production and prioritize the nominated alternatives. This step is highly valued because finding the most suitable place for this purpose can lead to substantial outcomes and consequently avoid failure. Therefore, here a 20-kW solar power plant is simulated by PVsyst 6.7 software and meteorological data of 31 capital cities is extracted using Meteonorm 7.1 software. Considering all losses associated with... 

In recent years, declining fossil fuel reserves and increasing environmental concerns led to higher utilization of renewable energy source (RES). One of the RES is Solar energy which is abundantly found in different areas of the globe, particularly in Iran. The aim of this research is to select a suitable site for constructing a solar power plant to generate electricity-hydrogen in southern Iran, Kerman province. For this purpose, a new hybrid Multi criteria decision making method is used. The Stepwise Weight Assessment Ratio Analysis (SWARA)method is used to weigh the criteria and the Measurement of alternatives and ranking according to Compromise solution (MARCOS)method is used to rank... 

The use of hybrid renewable energy has increased in recent years due to the growing environmental concerns caused by the consumption of fossil fuels. The purpose of this study was the economic-environmental feasibility of using hybrid energy systems in one of the most polluted and populated provinces in Iran, Isfahan province. Various components of the hybrid energy system such as wind turbine (WT), photovoltaic panel (PV), diesel generator (DG), converter (CV) along with two scenarios of energy storage including battery (BT) and hydrogen storage have been considered in modeling the energy system. Six scenarios were considered based on the combination of different components for supplying... 

An experimental study was conducted on a solar hybrid system to transform the waste heat of photovoltaic module (PV module) into a useful heat which could be used in a solar desalination (SD) system in order to produce freshwater (scenario 1). Then, different parameters such as the amount of the produced freshwater by condensed vapor on the glass cover and basin side walls were taken into consideration after the fabrication of the SD system. Furthermore, the effect of water depth in the tray and the effect of the presence of a fan inside the basin (scenario 3) on water yield (kg/m2hr) were evaluated. In addition, the effects of using a mirror to lead the reflected light on the PV module and... 

The techno-economic and environmental performance of hybrid solar hydrogen energy systems was investigated to provide combined cooling, heating and power (CCHP) demands of a standalone greenhouse in Iran to achieve sustainable agriculture based on an optimization procedure. From the environmental point of view, by deploying hybrid energy systems, 83%, to 100% of emissions can be avoided. Also a sensitivity analysis was performed on the hybrid energy systems in order to study the effect of major parameter variation on the systems justification. It was concluded that hybrid solar systems are economically competitive with conventional systems, for high solar intensity locations with high diesel... 

In this study, the optimal sizing and performance analysis of a standalone integrated solar power system equipped with different storage scenarios to supply the power demand of a household is presented. One of the main purposes when applying solar energy resource is to face the increasing environmental pollutions resulting from fossil fuel based electricity sector. To this end, and to compare and examine two energy storage technologies (battery and hydrogen storage technology), three storage scenarios including battery only, hydrogen storage technology only and hybrid storage options are evaluated. An optimization framework based on Energy Hub concept is used to determine the optimum sizes... 

Challenging problems in the design and analysis of photovoltaic (PV) systems stem from the nonlinear current–voltage (I–V) characteristics of solar cells. This paper presents an analytical analysis based on a describing function method to investigate the transient and steady-state characteristics of a three-phase single-stage grid-connected PV system. In this study, the nonlinear I–V characteristic of the PV array is linearized around the operating point. The nonlinear dynamic of the maximum power point tracking controller is divided into two parts of continuous and discrete. For the continuous part, the common small-signal linearization is applied, while for the discontinuous part, a... 

Recently, graphitic carbon nitride (g-C3N4) has attracted great interest for photo(electro)chemical applications such as sensing, solar energy exploitation, photocatalysis, and hydrogen generation. This paper presents the potential application and benefits of g-C3N4 nanolayers as a green and highly efficient electrode modifier for the detection of trace lead ions in drinking water and urban dust samples. Carbon nitride nanosheets with a thickness of ∼6 A° and lateral of 100–150 nm were prepared through high-temperature polymerization of melamine followed by sonication-assisted liquid exfoliation. A glassy carbon electrode (GCE) was modified by a thin layer of g-C3N4 through drop casting and... 

A huge amount of energy consumption, the cost of this usage and environmental effects have become serious issues for commercial cloud providers. Solar energy is a promising clean energy source, to provide some portion of the Internet data center's (IDC's) energy usage which can reduce environmental effects and total energy costs. Moreover, due to the high energy consumption of the cooling system, considering cooling power in job scheduling can provide efficient solutions to reduce total energy consumption. In this article, we investigate the problem of minimizing the energy cost of an IDC and propose an algorithm which schedules heterogeneous IDC workloads, by considering available renewable...