Sharif Digital Repository

In this paper, oil recovery and permeability reduction of a tight sandstone core sample in miscible CO2 flooding processes due to asphaltene deposition were studied using an Iranian bottom hole live oil sample in order to distinguish between the mechanical plugging and adsorption mechanisms of asphaltene involved in the interfacial interaction of the asphaltene/mineral rock system. A novel experimental method was designed and proposed to measure the amount of deposited asphaltene due to different mechanisms using the cyclohexane or toluene reverse flooding and spectrophotometer. In this work, the bottom hole live oil sample was injected first to a long core and then CO 2 injection was... 

Desalting plants are often installed in crude oil production units in order to remove water-soluble salts from an oil stream. Experiments in both the laboratory and field have shown the desalting process parameters to be very complicated. This research reflects the results of a study conducted regarding the impact of operational desalting parameters, including the effects of temperature, injected chemicals and the pH of the crude oil associated water, on an electrostatic desalter on one of the oil platforms owned by the Iranian Oil Offshore Company in the Persian Gulf. The temperature range applied was between 98 to 133 °C, at which the effects on water and oil density as well as salt... 

In this study, the main recovery mechanisms behind oil/water/gas interactions during the water-alternating-gas (WAG) injection process, in a network of matrix/fracture, were fundamentally investigated. A visual micromodel was utilized to provide insights into the potential applications of WAG process in fractured oil-wet media as well as the possibility of observing microscopic displacement behavior of fluids in the model. The model was made of an oil-wet facture/matrix network system, comprised of four matrix blocks surrounded with fractures. Different WAG injection scenarios, such as slug arrangements and the effects of fluid injection rates on oil recovery were studied. A new equation... 

Robust optimization (RO) approach is inherently a multi-objective paradigm. The proposed multi-objective optimization formulation would attempt to find the optimum - yet robust - water injection policies. Two multi-objective, Pareto-based robust optimization scenarios have been investigated to encounter the permeability uncertainties. These multi-objective RO scenarios have been done based on a small representative set of realizations but they have introduced optimum points that could be reliable for the original set of realizations either. In both scenarios, the desired objective functions are expected value and variance of Net Present Value (NPV). The underlying RO scenarios have been done... 

The amount of residual oil trapped in the matrix of a fractured reservoir after water drive, either natural water drive or water injection, depends on the wettability of the matrix rocks. Gas oil gravity drainage (GOGD) has been proposed as the tertiary oil recovery process for this type of oil reservoir. The current work focuses on experimental investigation of tertiary GOGD in fractured porous media under different types of matrix wettability. Results of a set of experiments performed in artificial porous media composed of sand packs and glass beads of different wettability have been used to check the GOGD rate and the ultimate oil recovery for previously waterflooded models. A novel... 

This work concerns observing the pressure as well as CO2 mole percentage effects on asphaltene molecular weight distributions at reservoir conditions. A high-pressure, high-temperature asphaltene measurement setup was applied, and the amount of precipitated asphaltene at different pressures as well as CO2 mole percentage in an Iranian heavy crude oil was measured. Moreover, the asphaltene molecular weight distributions during titration of crude oil with different n-alkanes were investigated. The gel permeation chromatography (GPC) apparatus was used for characterization of asphaltene molecular weight under different conditions. It has been observed that some thermodynamic changes such as... 

This study concerns with the microscopic and macroscopic fluid distribution and flow behavior during water alternating solvent (WAS) injection process to heavy oil using micromodel generated from thin section of a real rock which has rarely attended in the available literature. In this study, a one-quarter five-spot glass micromodel was deployed to examine the effect of flow media topology on microscopic displacements as well as macroscopic efficiency of WAS process. The micromodel was initially saturated with the heavy oil, and then the hydrocarbon solvent and water were injected alternately into it. The observations confirmed that WAS injection scheme is an effective method for the... 

Gas injection process for more oil recovery and in particular CO2 injection is well-established method to increment oil recovery from underground oil reservoirs. CO2 sequestration which takes place during this enhanced oil recovery (EOR) method has positive impact on reducing the greenhouse gas emission which causes global warming. Direct gas injection into depleted oil reservoirs, encounters several shortcomings such as low volumetric sweep efficiency, early breakthrough (BT) and high risk of gas leakage in naturally fractured carbonate oil reservoirs. Carbonated water injection (CWI) has been recently proposed as an alternative method to alleviate the problems associated with gas... 

In this work, the potential for the auto-ignition of Iranian heavy oil during in situ combustion (ISC) process conditions was studied. Kinetic studies were carried out using thermal analysis techniques. Effects of oxygen partial pressure, reservoir pressure, and clay on the auto-ignition condition were investigated. Based on the experimental results obtained, a kinetic equation was derived for each of the different oil samples in the presence of different sands. The effect of partial pressure of oxygen in the injected air showed that at atmospheric pressure, low temperature combustion (LTC) was initiated at 275°C. Also, enriching the injected air by oxygen lowers the initial LTC temperature... 

Injection of Emergency Core Cooling System (ECCS) water into the primary loops of the Pressurized Water Reactors (PWRs) leads to rapid cooling of Reactor Pressure Vessel (RPV) inside wall after Loss Of Coolant Accident (LOCA). This condition, known as Pressurized Thermal Shock (PTS) intensifies the propagation of the RPV structural defects and would be considered as an ageing mechanism. For structural and fracture analysis of RPV wall, thermal-hydraulic analysis of PTS should be accomplished to obtain the steam/water flow characteristics in the downcomer. For this purpose, simulation of steam/water stratified flow (due to density difference) after the injection point should be done by... 

Temperature gradient on the thick Reactor Pressure Vessel (RPV), caused by sudden overcooling events, especially in the downcomer, would intensify the propagation of structural defects. This situation known as Pressurized Thermal Shock (PTS) could be created in case of Emergency Core Cooling System (ECCS) actuation which leads to injection of cold water into the cold leg of the primary loop in some accidents, e.g. Loss Of Coolant Accident (LOCA). Prediction of Plant response to LOCA and water temperature gradient in the downcomer are performed in thermal-hydraulic section of PTS analysis. Employment of system codes is one of the proposed procedures in literature to obtain plant response and... 

Accurate determination of relative permeability (kr) curves and their hysteresis is needed for reliable prediction of the performance of oil and gas reservoirs. A few options (e.g., Carlson, Killough and Jargon models) are available in commercial reservoir simulators to account for hysteresis in kr curves under two-phase flow. Two-phase kr curves are also needed for estimating kr hysteresis under three-phase flow during water-alternating-gas (WAG) injection. Although, most oil reservoirs are mixed-wet, the existing hysteresis predictive approaches have been developed based on water-wet conditions. Experimentally measured data are needed to assess the performance of these methodologies under... 

The Steam Assisted Gravity Drainage (SAGD) process, a developed Enhanced Oil Recovery (EOR) process to recover oil and bitumen, has been studied theoretically and experimentally in conventional reservoirs and models and is found a promising EOR method for certain heavy oil reservoirs. In this work simulation studies of the SAGD process were made on different fractured models consisting of fractures in both Near Well Region (NWR) and Above Well Region (AWR) and even in the presence of networked fractures. At early stage of the SAGD process in fractured system, steam moves through the fractures first and then the matrix blocks are heated primarily by conduction and possibly some steam... 

This study aims to investigate the role of fluid-fluid interactions during low salinity water flooding, using crude oil from an Iranian oil reservoir. To minimize the effects of mineral heterogeneity and wettability alteration, a synthetic sintered glass core was utilized and all coreflooding experiments were performed at low temperatures without any aging process. The effect of fluid-fluid interactions were investigated in both secondary and tertiary injection modes. pH measurements as well as UV-Vis spectroscopy and interfacial tension (IFT) analysis were performed on the effluent brine samples. Results: show that fluid-fluid interactions, mainly the dissolution of crude oil polar... 

Seawater, which has been frequently applied in cooling and injection water systems, imposes severe pitting corrosion to mild steel. Addition of green and sustainable inhibitors based on renewable sources is one of the promising methodologies for restricting metal corrosion in chloride-containing electrolytes. In this study, for the first time, from both theoretical and experimental faces, the role of Juglans regia green fruit shell (JRS) extract as a sustainable potent corrosion inhibitor for mild steel was studied. The chemical structure of the JRS extract was deliberated by Fourier transform infrared spectroscopy (FT-IR). By electrochemical techniques including polarization, EIS and... 

Smart water injection is recognized as an effective EOR process to alter the wettability and interfacial tension to obtain higher micro/macro sweep efficiencies. This water contains reactive ions such asMg2+, Ca2+ andSO42- which can act as potential-determining ions and change the surface charge of calcite rocks. One of the major concerns in the execution of an effective water-flood process, especially in tight carbonate reservoirs, is the chemical incompatibility between the formation brine and the injecting water. In the present study, laboratory fluid compatibility tests were carried out and software simulation was done to investigate the most important challenges of the water-flooding... 

During the low salinity waterflooding (LSWF) of a viscous asphaltic oil reservoir, fluid-fluid interactions have a large influence on the fluid flow, pore-scale events, and thus oil recovery efficiency and behavior. In-situ water-in-oil (W/O) emulsion formation is a consequence of crude oil and brine interfacial activities. Despite the published studies, the pore-scale mechanisms of W/O emulsion formation and the role of injected brine salinity, injection rate, and pore-scale heterogeneity on emulsion formation and stability requires a deeper understanding. To address these, a series of static and dynamic micro-scale experiments were performed. The salinity dependent oil-brine interactions... 

This work concerns the experimental investigation of surfactant alternating CO 2 injection in carbonate rocks. The core samples provided from a low-temperature fractured light oil reservoir, located in southwest Iran. The experiments were designed to observe the effect of CO 2-foam injection on gas mobility and oil recovery at different surfactant concentrations. The core samples were initially saturated with synthetic/field brine, 5,000 ppm, and then flooded with live oil to reach connate water saturation at reservoir condition, 115F and 1,700 psia. The commercial surfactant used was sodium lauryl sulfate as an anionic surfactant. The results of this work, along with field-scale simulation...