Loading...

Toughness behavior in roll-bonded laminates based on AA6061/SiCp composites

Hosseini Monazzah, A ; Sharif University of Technology

1224 Viewed
  1. Type of Document: Article
  2. DOI: 10.1016/j.msea.2014.01.014
  3. Abstract:
  4. Lamination has been shown to enhance damage tolerance of discontinuously reinforced aluminum (DRA) composites. Doing this technique, DRA layers could be laminated with ductile interlayers. In this research, two types of laminates consisting similar DRA layers and a ductile AA1050 interlayer were fabricated by means of hot roll-bonding. AA6061-5. vol% SiCp and AA6061-15. vol% SiCp composites were considered as exterior layers. Different rolling strains, was applied to control the interfacial strength which was examined by shear test. Toughness behavior of laminates was evaluated by three-point bending test in crack-divider orientation. Based on obtained results, the plastic deformation of ductile interlayer and delamination are challenging toughening mechanisms which were influenced by the degree of interfacial bonding and ceramic particle content. An increment in reinforcement content alters the toughness behavior of laminates in the way that the governing mechanism in laminates containing 5. vol% SiCp is interfacial adhesion since in laminates having 15. vol% SiCp the dominant mechanism is AA1050 deformability. Meanwhile, optical and scanning electron microscopy observations proved the importance of toughening mechanisms in each type of materials. Also, shear test results revealed that the interfacial strength of laminates increases by the number of rolling passes and deteriorated by higher reinforcement contents
  5. Keywords:
  6. AA6061/SiC composites ; Plastic deformability ; Roll-bonded laminates ; Toughness behavior ; Dominant mechanism ; Interfacial adhesions ; Interfacial bonding ; Interfacial strength ; Reinforced aluminum composites ; Reinforcement content ; Three-point bending test ; Toughening mechanisms ; Composite films ; Deformation ; Failure (mechanical) ; Laminates ; Laminating ; Reinforcement ; Roll bonding ; Scanning electron microscopy ; Plastic laminates
  7. Source: Materials Science and Engineering A ; Vol. 598 , 2014 , pp. 162-173 ; ISSN: 09215093
  8. URL: http://www.sciencedirect.com/science/article/pii/S0921509314000355