Loading...

Effect of exfoliated molybdenum disulfide oxide on friction and wear properties of ultra high molecular weight polyethylene

Amini, M ; Sharif University of Technology | 2018

1474 Viewed
  1. Type of Document: Article
  2. DOI: 10.1002/pat.4429
  3. Publisher: John Wiley and Sons Ltd , 2018
  4. Abstract:
  5. The aim of this work is to investigate the effect of molybdenum disulfide on tribological properties of Ultra-high-molecular-weight polyethylene (UHMWPE). UHMWPE/MoS2 nano-composites were prepared using in-situ polymerization and Ziegler-Natta catalytic system. Studies showed that, in order to obtain the optimum tribological properties, interlayer distance between nanosheets should be as high as possible. Therefore, the nanosheets were subjected to oxidation using the required oxidants followed by thermal shock and ultrasound. Fourier-transform infrared spectroscopy (FTIR) analysis was used to determine the formation of functional groups which indicate the formation of S═O bond in the molybdenum disulfide oxide. Then, in order to exfoliate and increase the interlayer distance of nanosheets, thermal shock and ultrasonic were conducted Field Emission Scanning Electron Microscopy (FESEM) analyses. Finally, the obtained sample was used as the second support of catalyst in in-situ polymerization process. Then, under specified and constant operational conditions, the synthesis of samples containing 0.5%, 1%, and 2% nanoparticles were conducted. The results of the morphological study with FESEM indicate that the filler is uniformly distributed in the matrix, and X-ray Powder Diffraction (XRD) analysis showed that completely exfoliated nanocomposites were resulted and in low nanoparticle content. Addition of MoS2 as reinforcing agent had a significant effect on friction coefficient of the nanocomposites. With the addition of 0.5 wt% of MoS2, the friction coefficient declined by approximately 35%. Furthermore, negligible decrease in sample's weight after the wear test is an indication of a strong interaction between MoS2 and the matrix. Scratch resistance test revealed that with the addition of filler, the resistance increased from 23 to 60 MPa. © 2018 John Wiley & Sons, Ltd
  6. Keywords:
  7. MoS2 oxide ; Tribological and friction ; UHMWPE ; Ziegler-Natta catalyst ; Catalysts ; Field emission microscopes ; Fillers ; Fourier transform infrared spectroscopy ; Friction ; Layered semiconductors ; Molecular weight ; Nanocomposites ; Nanoparticles ; Nanosheets ; Nonmetallic matrix composites ; Polymerization ; Scanning electron microscopy ; Sulfur compounds ; Synthesis (chemical) ; Thermal shock ; Tribology ; Ultrahigh molecular weight polyethylenes ; Wear of materials ; X ray powder diffraction ; Exfoliated nanocomposites ; Field emission scanning electron microscopy ; Friction and wear properties ; In-situ polymerization ; In-situ polymerization process ; Operational conditions ; Tribological properties ; Ziegler-Natta catalysts ; Molybdenum oxide
  8. Source: Polymers for Advanced Technologies ; Volume 29, Issue 12 , 2018 , Pages 3085-3096 ; 10427147 (ISSN)
  9. URL: https://onlinelibrary.wiley.com/doi/pdf/10.1002/pat.4429