Sharif Digital Repository

Solar energy exists extensively in all parts of the world. However the intermittency of solar energy presents critical challenges to PV system. The intermittency can be covered by storing solar energy in chemical bonds such as hydrogen. This process can be performed by photovoltaic powered electrolysis of water. The energy transfer efficiency between PV and electrolyzer is subject to the distance between maximum power points (MPP) of PV module and operating points. The operating points can be adjusted by optimizing the design parameters of the electrolyzer but the maximum power points are function of PV module characteristics, solar radiation and ambient temperature. Therefore the weather... 

In this study, two types of ionic liquids (ILs) based on 1 butyl 3 methylimidazolium [Bmim]+ and butyltrimethylammonium [Btma]+ cations, paired to tetrafluoroborate [BF4], hexafluorophosphate [PF6], dicyanamide [DCA], and bis(trifluoromethylsilfonyl)imide [Tf2N] anions, were chosen as adsorbates to investigate the influence of cation and anion type on the adsorption of ILs on the graphene surface. The adsorption process on the graphene surface (circumcoronene) was studied using M06 2X/cc pVDZ level of theory. Empirical dispersion correction (D3) was also added to the M06 2X functional to investigate the effects of dispersion on the binding energy values. The graphene···IL configurations,... 

The purpose of this paper is to investigate the effects of annealing phenomena on the energy absorption of Al-steel bilayer sheets, bonded by cold rolling, through wedge tearing. Tearing by wedge is a dissipating energy system that includes three components: cutting, friction and plastic deformation due to bending. In order to find the bonding and annealing effects on energy absorption, the non-bonded bilayer sheets are prepared in the same condition of bonded ones. The results show that energy absorption of bonded sheets is larger than that of non-bonded ones. This is due to different plastic bending moment of bonded and non-bonded bilayer sheets. Whenever the bond is improved by heat... 

The mechanism of interface formation during sinter-joining of nanostructured yttria stabilized zirconia (27 nm) compacts with chromium powder was investigated. The effect of sintering atmosphere, i.e. argon or vacuum, was studied. Microstructural evaluation and phase formation was examined by scanning electron microscopy (SEM), electron probe micro-analysis (EPMA), and micro-focused X-ray diffraction (MFXRD) methods. It is shown that spreading and evaporation-condensation mechanisms are responsible for the interface formation. An improved joint shear-strength was obtained after sintering in vacuum (74 MPa) compared with argon (41 MPa). The result of MFXRD indicated formation of Cr-island at... 

Mechanical properties of nano-composites produced by shock wave sintering of aluminum and silicon carbide nano-powders are investigated using Molecular Dynamics (MD) simulations. In this regard, the shock wave response of aluminum and silicon carbide nano-particles, arranged in a BCC super-lattice, is studied via the NPHug Hugoniostat method. Moreover, the effect of the initial hydrostatic compaction of powders as well as the cooling rate of the shocked material on the mechanical properties of the shock-sintered nano-composites is investigated. Employing the Hugoniot curves corresponding to the powders, it is concluded that an initial hydrostatic pressure, leads to a less temperature rise... 

This study examined the bond at the interface of masonry bricks and fiber-reinforced polymer when exposed to five environments. Three fabrics (aramid, carbon, and glass) and one type of epoxy resin were used. A total of 375 brick-fiber-reinforced polymer specimens were made using wet lay-up technic and exposed to chemical solutions at four pH values (2.5, 7, 10, and 12.5) and substitute seawater. The effect of dry heat on the bond at the interface was also investigated. Single-lap shear tests were then carried out on the samples after 2, 4, 6, 8, 10, and 13 weeks of exposure. The experimental results indicated that freshwater and seawater had a considerable effect on the bond strength of... 

Abstract: This work describes coating of NiCoCrAlY on IN-738LC superalloy by high-velocity oxygen fuel (HVOF) process. Properties of the coatings are significantly influenced by oxygen/fuel ratio and other spraying parameters. The effect of oxygen/fuel ratio on the oxidation behavior, bond strength, hardness, roughness and microstructure including porosity, inclusion formation and unmelted particles are discussed here. The porosity and inclusion in C1 coating are maximal. C2 coating with oxygen/fuel ratio of 2 has the highest bond strength and the lowest unmelted particles. C3 coating with the lowest total porosity and inclusion has the minimal roughness and the highest oxidation resistance... 

Composite coatings of Hydroxyapatite (HA) with ceramics, polymers and metals are used to modify the surface structure of implants. In this research, HA/TiO2 composite coating was fabricated by electrophoretic deposition (EPD) on 316 stainless steel substrate. HA/TiO2 composite coatings with 5, 10 and 20 wt.% of TiO2, deposited at 40 V and 90 s as an optimum condition. The samples coated at this condition led to an adherent, continuous and crack-free coating. The influence of TiO2 content was studied by performing different characterization methods such as scanning electron microscopy (SEM), energy dispersive x-ray spectroscopy (EDS), corrosion resistance in simulated body fluid (SBF),... 

This work describes coating of NiCoCrAlY on IN-738LC superalloy by high-velocity oxygen fuel (HVOF) process. Properties of the coatings are significantly influenced by oxygen/fuel ratio and other spraying parameters. The effect of oxygen/fuel ratio on the oxidation behavior, bond strength, hardness, roughness and microstructure including porosity, inclusion formation and unmelted particles are discussed here. The porosity and inclusion in C1 coating are maximal. C2 coating with oxygen/fuel ratio of 2 has the highest bond strength and the lowest unmelted particles. C3 coating with the lowest total porosity and inclusion has the minimal roughness and the highest oxidation resistance and... 

In the present work the effect of simultaneous doping of carbon and nickel on the microstructural, optical, and electrical properties of barium strontium titanate (BST) is investigated. Thin films of BST were prepared by the sol-gel method in six different compositions ((Ba0.6Sr0.4)(NixCyTi1-x-y)O3): x = y = 0.00 (BST), x = 0.04 y = 0.00 (BST4N), x = 0.04 y = 0.01 (BST4N-1C), x = 0.04 y = 0.02 (BST4N-2C), x = 0.04 y = 0.03 (BST4N-3C), and x = y = 0.04 (BST4N-4C). Structural features and chemical bonds of the films were studied by TGA/DSC, XRD, FT-IR, and FE-SEM. The electrical and optical properties of the films were analysed by impedance spectroscopy and UV–VIS spectroscopy. The results... 

Isothermal solidification stage during transient liquid phase bonding is the key to preclude intermetallic phase formation during solidification of the liquid phase. The rate of isothermal solidification is controlled by solid-state diffusion. Therefore, the bonding time required to complete isothermal solidification is generally long. This paper reports a very short isothermal solidification time for transient liquid phase bonding of IN617 solid solution nickel-based superalloy using a boron-containing filler metal. A eutectic-free bond with limited grain growth in the base material with high shear strength is achievable by utilizing a short (i.e., 5 minutes) thermal bonding strategy. The... 

Ammonium polyphosphate (APP) is one of the most widely used halogen-free flame retardant, added in various resins to improve the fire properties, such as flame and smoke spread ratings and LOI, of fiber-reinforced polymer (FRP) composites. This paper experimentally investigates the effects of using APP, as a fire-retardant filler, on mechanical properties (i.e. ultimate tensile, flexural, and bond strength) of glass fiber-reinforced polymer (GFRP) and carbon fiber-reinforced polymer (CFRP) composites. Based on two fiber types (i.e. carbon and glass) and three different APP mass fractions in resin (i.e. 0, 20, and 40% of total weight of matrix), six sets of specimens were prepared for each... 

The influences of cupric oxide layer thickness, cuprous oxide particles, and pores on mechanical properties and microstructure of alumina-copper eutectic bond have been investigated. The furnace atmosphere in the first stage was argon gas with 2 × 10-6 atm oxygen partial pressure. In the second stage, the furnace atmosphere was same as the first stage unless that in cooling between 900-1000 °C, the hydrogen gas was purged in furnace atmosphere. Finally, in the last stage a vacuum furnace with 5 × 10 -8 atm pressure was chosen for bonding procedure. Peel strength of first stage specimens shows that cupric oxide layer with 320 ± 25 nm thick generates the maximum peel strength (13.1 ± 0.3... 

This research aims to present asphaltene fraction of oil by FTIR spectrum technique. For this purpose, three different oil samples with various SARA contents and almost identical API degrees were utilized in this research. Two asphaltenic oil samples were referred to as ‘A’ and ‘B’, and the aliphatic oil sample was named as ‘C’. First of all, the asphaltene fraction was extracted through the IP-143 test. The possible chemical bonds and functional groups were identified through NMR tests. Then, the FTIR spectrums of the oil samples and the extracted corresponding asphaltene fractions were taken. The interpretations were used to find the functional groups in the FTIR of the oil samples that... 

In our previous report (J. Phys. Org. Chem., 2017), we discussed the dual behavior of gold nanocluster (Au3 NC), where it scavenged reactive oxygen species (ROS) while promoted their generation to a lesser extent. Continuing this quest, we investigate the effects of Au3 NC on common reactive nitrogen species (RNS: O=N˙ and O=N-O) and their precursors (O=N-H and O=N-O-H, respectively), at B3LYP/LACVP+* level of theory. We compare the results with those of prevalent ROS (H-O˙ and H-O-O˙) and their precursors (H-O-H and H-O-O-H, respectively). To this end, various parameters are probed such as binding energy (Eb), bond dissociation energy (BDE), bond lengths, Mullikan spin density (MSD),... 

In our previous report (J. Phys. Org. Chem., 2017), we discussed the dual behavior of gold nanocluster (Au3 NC), where it scavenged reactive oxygen species (ROS) while promoted their generation to a lesser extent. Continuing this quest, we investigate the effects of Au3 NC on common reactive nitrogen species (RNS: O=N˙ and O=N-O) and their precursors (O=N-H and O=N-O-H, respectively), at B3LYP/LACVP+* level of theory. We compare the results with those of prevalent ROS (H-O˙ and H-O-O˙) and their precursors (H-O-H and H-O-O-H, respectively). To this end, various parameters are probed such as binding energy (Eb), bond dissociation energy (BDE), bond lengths, Mullikan spin density (MSD),... 

ZnO/CuO nanofibers, with different CuO concentrations, were fabricated by one-step electrospinning of the polymer precursor and annealing in air. Scanning electron microscopy (SEM) showed smooth and beadless morphology for the synthesized nanofibers, while X-ray diffraction (XRD) analysis revealed formation of hexagonal and monoclinic crystalline structure phases for ZnO and CuO nanofibers, respectively. X-ray photoelectron spectroscopy (XPS) analysis confirmed the presence of CuO on the surface of ZnO nanofibers. For further confirming the formation of chemical bonds, Fourier transform infrared (FT-IR) spectroscopy was employed. The effect of Cu contents in the overall electronic band... 

Interaction of the DNA thymine base with Cu+ and Zn3+ was studied to explore: a) The metal binding energy (MIA) of thymine with Cu+ and Zn2+ and b) The possible correlation between charge transfer and MIAs. The gas-phase Cu+ and Zn2+ affinities of thymine, as well as the Mulliken charges, on the complexed metal cations were both determined at the same computational level, including the density functional level and employing the hybrid B3LYP exchange correlation potential in connection with the 6-311++G (d,p) basis set. All the molecular complexes were obtained by interaction between the most stable tautomer of thymine and two transition mono and divalent (Cu+, Zn2+) metal ions. To probe all... 

The influences of cupric oxide layer thickness, cuprous oxide particles and pores on the mechanical properties and micro structure of an alumina-copper eutectic bond have been investigated. The furnace, atmosphere in the. first stage was argon gas with 2 × 10-6 atm oxygen partial pressure. In the second stage, the. furnace atmosphere was the. same as the first stage except that the cooling interval was between 900-100l°C and the hydrogen gas was injected into the. furnace, atmosphere. Finally, in the last stage, a vacuum furnace with 5 × 10-8 atra pressure was chosen for the bonding procedure. The peel strength of first stage specimens shows that a, cupric oxide layer with 320 ± 25 ran... 

This research reports the preparation and examination of Cadmium Telluride (CdTe) Quantum Dots and doping CdTe QDs with Europium (Eu), Gadolinium (Gd), and Manganese (Mn) prepared in aqueous solution using TGA as a capping agent. Magnetic QDs (MQDs) are important agents for fluorescence (FL) /magnetic resonance (MR) dual-modal imaging due to their excellent optical and magnetic properties. Herein, the chemical bonds, structural, fluorescence, and magnetized properties of CdTe QDs and effect of Mn, Eu, and Gd ions doping on their properties were examined by X-ray powder diffraction (XRD), high-resolution transmission electron microscopy (HRTM), Energy-dispersive X-ray spectroscopy (EDX),...