Sharif Digital Repository

Self-propagating exothermic reactions during mechanical milling of FeCl 3/CoCl 2 mixture together with sodium seeds resulted in formation of Fe 50Co 50 nanoparticles. Highly exothermic reactions resulted in temperature raise and formation of Fe 50Co 50 phase within the first 5min; however Fe 50Co 50 single-phase was obtained after 30min of milling. The products were characterized by XRD, SEM, EDS, TEM and VSM. Obtained results showed that both milling time and NaCl salt matrix affected the size, morphology, microstructure and magnetic properties of the produced particles  

Properties of FeCo nanocrystalline intermetallic powders prepared by salt-matrix hydrogen reduction of a milled Fe 2O 3-Co 3O 4 mixture were investigated. The product of 72 ks ball-milling at 350 rpm was CoFe 2O 4 nanopowder. Reduction of this powder for 3.6 ks by hydrogen at 750 °C resulted in the formation of Fe 0.67Co 0.33 stoichiometric compound. Scanning electron microscopy, electron dispersive spectrometry, X-ray diffraction and vibrating sample magnetometry were used to characterize the nanopowder. Using a salt-matrix (NaCl as a dispersion medium) resulted in the decrease of the reduction temperature and improvement of the morphology and magnetic properties of the nanopowder.... 

A biocompatible ferrofluid have been prepared by coprecipitation of FeCl 2.4H 2O and FeCl 3.6H 2O under ultrasonic irradiation and with NaOH as alkaline agent. Cystein was also used as capping agent in the solution. Magnetic properties of the produced ferrofluid were then determined by VSM test and magnetite nanoparticles were characterized by XRD and TEM techniques. The effect of surfactant to Fe ion weight ratio was also studied during this project by using two different amount of Dextran. Results showed the presence of a biocompatible superparamagnetic ferrofluid including magnetite nanoparticles with particle size ranging under 20 nm. The increase in the surfactant content results in the... 

The influence of milling and subsequent annealing on nickel-ferrite phase formation was investigated by X-ray diffraction (XRD). Microstructure and magnetic properties of NiFe 2O 4 were determined by field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM) and vibration sample magnetometry (VSM). Single phase nanosized nickel-ferrite was obtained by 30 h mechanical alloying (MA) and subsequent annealing at 600 °C for 1 h. Magnetic properties of the milled powder were extensively affected by the annealing temperature. Considerable growth of the particles and necking by sintering resulted from annealing at 1000 °C  

In this study a low-width MoS2 ribbon has been used for probing the electronic structure and local magnetic moment near vacancies. A theoretical study with the full-potential Density Functional Theory (DFT) approach (Wien2K code) have shown that when the dimension of MoS2 is reduced from 2-D to 1-D the nonmagnetic semi-conductor MoS2 becomes a magnetic conductor. Our study has shown that a vacancy on the S-edge with 50% coverage intensifies the magnetization of the edge of the MoS2 nanoribbon but such a vacancy on S-edge with 100% coverage causes this magnetic property to disappear. It is concluded that in both of them, there are positive or negative strong gradients of local magnetic moment... 

Magnetite (Fe3O4) nanostructures with different morphologies including uniform nanoparticles, magnetic beads and nanorods were synthesized via a co-precipitation method. The synthesis process was performed at various temperatures in the presence of polyvinyl alcohol (PVA) at different concentrations. It is shown that small amounts of PVA act as a template in hot water (70 °C), leading to the oriented growth of Fe3O4 nanorods, which was confirmed by selected area electron diffraction. Individually coated magnetite nanoparticles and magnetic beads were formed at a relatively lower temperature of 30 °C in the folded polymer molecules due to the thermo-physical properties of PVA. When a moderate... 

Core-shell iron-gold (Fe@Au) nanoparticles were synthesized by a facile reverse micelle procedure and the effect of water to surfactant molar ratio (w) on the size, size distribution and magnetic properties of the nanoparticles was studied. MTT assay was utilized to evaluate the cell toxicity of the nanoparticles. To functionalize the particles for MRI imaging and targeted drug delivery, the particles were coated by polyglycerol through capping with thiol followed by polymerization of glycidol. The characteristics of the particles were examined by X-ray diffraction (XRD), transmission electron microscopy (TEM), vibrating sample magnetometere (VSM), UV-visible spectroscopy, and Fourier... 

The nanocrystallization process of amorphous Fe73.5Si13.5B9Nb3Cu 1 was investigated by active screen plasma nitriding (ASPN) treatment at temperatures ranging from 410 °C to 560 °C for 3 h in two gas mixtures of 75% N2-25% H2 and 25% N2-75% H2 at 5 mbar atmosphere. The amorphous ribbons were then annealed under vacuum at the same time and temperatures mentioned above. The structure of the samples was analyzed using various techniques such as X-ray diffraction (XRD), atomic force microscopy (AFM) and differential scanning calorimetry (DSC). Microhardness measurements, electrical resistivity and Vibrating Sample Magnetometer (VSM) were used to study mechanical, electrical and magnetic... 

We have studied the effect of negative chemical pressure in the RuGd 1.5(Ce 0.5-xPr x)Sr 2Cu 2O 10-δ with Pr content of 0.0 ≤ x ≤ 0.2. This is also investigated using the bond length results obtained from the Rietveld refinement analysis. The c parameter and cell volume increase with x for 0.0 ≤ x ≤ 0.15. The width of the resistivity transition also increases with Pr concentration, indicating higher inhomogeneity and oxygen deficiency. The difference in the ionic valences of Pr 3+,4+ and Ce 4+ causing different hole doping, the difference in the ionic radii, and oxygen stoichiometry affect the superconducting transition. The magnetoresistance shows a cusp around 135 K which lies between the... 

Ternary mesoporous nanocomposites of RGO/Fe3O4-ZnO were prepared successfully via hydrothermal technique. Fe3O4-ZnO core/shell nanoparticles were decorated on the surface of reduced graphene oxide platelet to improve charge separation efficiency and magnetic properties. The phase, microstructure and specific surface area of the prepared samples were determined via X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), transmission electron microscopy/selected area electron diffraction (TEM/SAED) and Brunauer–Emmett–Teller (BET) techniques. A vibrating sample magnetometer (VSM) was used for recording the magnetization hysteresis curves. The methylene blue (MB)... 

Thin films of Fe73.1Cu1Nb3.1Si14.7B8.2 alloy with 200, 500, and 800 nm thicknesses have been deposited by RF sputtering. Their magnetic properties have been characterized using Alternating Gradient Field Magnetometer (AGFM) and Vibrating Sample Magnetometer (VSM). The effects of residual stresses investigated by nanoindentation experiments were conducted on the as-deposited samples. It is observed that the coercivity of as-deposited films is inversely proportional to the thickness in relation with the residual stress induced during sputtering. © 2017 Sharif University of Technology. All rights reserved  

This study investigated the behavior of ferrofluids containing superparamagnetic iron oxide nanoparticles (SPION) of various compositions for potential applications in drug delivery and imaging. To ensure biocompatibility, the interaction of these SPION with two cell lines (adhesive and suspended) was also investigated using an MTT (3-(4,5-dimethylthiazol-2-yl)-2,5- diphenyltetrazolium bromide) assay. The cell lines studied were primary mouse connective tissue cells (adhesive) and human leukemia cells (suspended). SPION were synthesized with a co-precipitation method under different stirring rates and NaOH molarities. The SPION demonstrated a range of magnetic saturations due to their... 

In search of finding the dominant mechanism in high temperature superconductivity phenomena, the Y3Ba5Cu8O18 compound was synthesized through the standard solid-state reaction technique. Characteristic XRD experiment was performed on the samples and was analyzed by the MAUD software refinement program. The analysis results indicate a 358 phase structure with the initial nominal stoichiometry. The electrical resistivity and its behavior under different magnetic field were measured. The electrical resistivity indicates the transition temperature Tc onset = 102 K with transition width ΔTc = 2.4 K. This is the first observation of such a high transition temperature in the Y-based compound.... 

Fe-Ni nano-particles were synthesized by mechanical alloying and subsequent low-temperature hydrogen reduction of oxide mixtures. First, single-phase nickel ferrite was mechanically synthesized for 30 h with steel balls to powder weight ratio of 20 while the milling was operated at 300 rpm. The as-milled powder was then placed in contact with hydrogen at 600 °C for 1 h. Reduction reactions resulted in production of Fe-Ni nano-particles. Phase identification, morphological and microstructural studies, chemical analysis and magnetic property determination were carried out by X-ray diffraction (XRD), scanning electron microscopy (SEM), transition electron microscopy (TEM), energy dispersive... 

Most recent findings on structural and magnetic properties of Fe-Ni-Co nano-powders produced by mechanical alloying and subsequent low-temperature hydrogen reduction are presented in this paper. At 300 rpm, with ball to powder weight ratio of 20, single phase nickel-cobalt ferrite is mechanically synthesized for 50 h. The as-milled powder is then subjected to 1 h hydrogen reduction at 700 °C. Hydrogen reduction results in the formation of Fe-16.5%Ni-16.5%Co nano-powders. The phases of the powders are identified by X-ray diffraction (XRD) utilizing Cu Kα radiation. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) are used to study the morphology and the average... 

This study shows the growth behavior of Co-Ni alloy nanowires in AAO template. Growth of nanowires consists of four different stages namely electronucleation, steady state growth, filling of pores, and coverage of filled nanowires and forming of a film on the template surface. TEM study of nanowires showed that the nanowires possess hemispherical head due to the preferable and more rapid growth phenomenon in central section of nanowires instead of edge sides. Studies on the relations between nanowires composition and ion concentration in solution showed that growth of nanowires is a diffusion-controlled process. The compositional, structural and magnetic properties of nanowires were... 

Recently, there has been great interest in Bio informatics among researches from various disciplines such as computer science, mathematics, statistics and artificial intelligence. Bioinformatics mainly deals with solving biological problems at molecular levels. One of the classic problems of bioinformatics which has gain a lot attention lately is Haplotyping, the goal of which is categorizing SNP-fragments into two clusters and deducing a haplotype for each. Since the problem is proved to be NP-hard, several computational and heuristic methods have addressed the problem seeking feasible answers. In this work it is shown that using PCM to solve Haplotyping problem in DALY dataset yields... 

In present research, nanocrystalline Fe100-xSix (x = 6.5, 10, 13.5, 20 and 25 at.%) and Fe83.5Si13.5Nb3 alloy powders were prepared by mechanical alloying using high-energy ball milling. The resulting powders mainly consist of micron-sized particles with an average grain size of less than 20 nm. According to the XRD test results, by increasing the milling time and/or the Si content the lattice parameter decreases and the internal microstrain increases. In addition, the specific saturation magnetization diminishes as Si content increases. The coercive forces of the as-milled nanocrystalline powders are much higher than those of corresponding Fe-Si bulk alloys with a minimum at 13.5 at.% Si.... 

We have compared the electrical and magnetic properties of Ru(Gd 1.5-x Pr x )Ce 0.5Sr 2Cu 2O 10-δ (Pr/Gd samples) with x = 0.0, 0.01, 0.03, 0.033, 0.035, 0.04, 0.05, 0.06, 0.1 and RuGd 1.5(Ce 0.5-x Pr x ) Sr 2 Cu 2O 10-δ (Pr/Ce samples) with x = 0.0, 0.01, 0.03, 0.05, 0.08, 0.1, 0.15, 0.2 prepared by the standard solid-state reaction technique. We obtained the XRD patterns for different samples with various x. The lattice parameters versus x for different substitutions have been obtained from Rietveld analysis. To determine how the magnetic and superconducting properties of these layered cuprate systems can be affected by Pr substitution, the resistivity, and magnetoresistivity, with H ext... 

The continuing process of software systems enlargement in size and complexity becomes system design extremely important for software production. In this way, the role of software architecture is significantly important in software development. It serves as an evaluation and implementation plan for software development and software evaluation. Consequently, choosing the correct architecture is a critical issue in software engineering domain. Moreover, software architecture selection is a multicriteria decision-making problem in which different goals and objectives must be taken into consideration. In this paper, more precise and suitable decisions in selection of architecture styles have been...