Sharif Digital Repository

Vertically aligned ZnO@CdS nanorod heterostructure films with various loadings of CdS nanoparticle shell were synthesized and applied in photoinactivation of Escherichia coli bacteria under visible light irradiation. While neither the bare ZnO nanorods (with band-gap energy (Eg) of ∼3.28 eV) under visible light irradiation nor the nanorod heterostructures in dark exhibited any significant antibacterial activity, the ZnO@CdS nanorod heterostructures (with Eg ∼2.5-2.6 eV) could successfully inactivate the bacteria under visible light irradiation. Furthermore, it was found that an optimum loading of the CdS shell (corresponding to the effective thickness less than ∼15 nm) is required to achieve... 

The leaching kinetics of stibnite in basic solution has been investigated. Spherical pellets of antimony sulphide were dissolved in 1 molar sodium hydroxide solutions at different temperatures. It was found that the shrinking core with ash layer model could satisfactorily explain the dissolution process. Using this model, it was found that initially the rate controlling step was a chemical reaction with activation energy of 10.2 kJ/mol. As the ash layer built up, diffusion through the ash layer became the rate controlling step. The activation energy for this step was found to be 33.4 kJ/mol. It was also observed that smaller particle size, larger solid to liquid ratio, and higher NaOH... 

CuMS2 (M=A1, In, Fe) ternary compounds were synthesized via the facile polyol method in autoclave. Depending on the functional groups of solvent and surfactant, the structure of the nanocrystals can be controlled in the form of wurtzite or chalcopyrite. The chalcopyrite structure was obtained when the precursors solved in the mixture of diethylene glycol, polyethylene glycol 600 and ammonium hydroxide. When the solvent was replaced by ethylene diamine, the wurtzite was obtained along with chalcopyrite (polytypism). The products were characterized by X-Ray Diffraction (XRD) for analysis of structural properties, Transmission Electron Microscopy (TEM) for studying morphological... 

CdS/TiO2/graphene (CTG) nanocomposite thin films were synthesized by a facile production route. The TiO2/graphene (TG) nanocomposite was initially fabricated by sol-gel method in such a way that TiO2 nanoparticles loaded on graphene oxide (GO) sheet via photocatalytic process. Then, CdS nanoparticles were deposited on the TG thin film by successive ion layer adsorption and reaction process (SILAR) approach. Based on atomic force microscopy (AFM), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) analyses, the TG thin film possessed a larger surface area as compared with the pure TiO2 thin film due to presence of graphene sheet. UV/visible spectroscopy exhibited... 

In this paper, we report that a known dinuclear Fe complex, [tpa(H2O)FeOFe(H2O)tpa](ClO4)4 (tpa: tris(2-pyridylmethyl)amine), is an efficient catalyst toward organic sulfide oxidation in the presence of urea-hydrogen peroxide  

We report a new design of solar cells based on semiconductor quantum dots (QDs), monolithic quantum dot sensitized solar cells (MQDSCs). MQDSCs offer the prospect of having lower cost and a simpler manufacturing process in comparison to conventional double substrate QDSCs. Our proposed monolithic QDSCs have a triple-layer structure, composed of a CdS sensitized mesoporous TiO2 photoanode, a scattering layer made by a core-shell structure of TiO 2/SiO2, and a carbon active/graphite counter electrode layer, which are all deposited on a single fluorine doped tin oxide (FTO) glass substrate. Mesoporous TiO2 was sensitized with CdS QDs by successive ionic layer adsorption and reaction. Here,... 

In the present work a new strategy for straightforward fabrication of CdS/CdTe solar cells, containing CdS nanowires and nanoparticles as a window layer and CdTe nanoparticles and microparticles as an absorber layer, are reported. CdS and CdTe nanostructures were synthesized by solvothermal method. X-ray diffraction analysis revealed that highly pure and crystallized CdS nanowires and nanoparticles with hexagonal structure and CdTe nanoparticles with cubic structure were obtained. Atomic force microscope and field emission scanning electron microscope images showed that CdS nanowires with length of several μm and average diameter of 35 nm, CdS nanoparticles with average particle size of 32... 

Novel ZnO-carbon and ZnO nanofibers were fabricated by electrospinning of polymer precursor followed by subsequent annealing in nitrogen and air, respectively. Field emission scanning electron microscopy (FESEM) and X-ray diffraction (XRD) indicated the smooth and beadless nanofibers with wurtzite crystal structure. X-ray photoelectron spectroscopy (XPS) showed the presence of oxygen vacancies (VO) and chemisorbed O2 on the surface of the samples. Band gap narrowing of the ZnO-carbon nanofibers in comparison to ZnO were measured by diffuse reflectance spectroscopy (DRS). Photo-degradation of azo dye under the UV and visible light was evaluated and ZnO-carbon showed an enhancement in... 

New experimental results are presented for the solubility of carbon dioxide, hydrogen sulfide in the ionic liquid 1-octyl-3-methylimidazolium hexafluorophosphate ([C8mim][PF6]) at temperatures range from (303.15 to 353.15) K and pressures up to about 2 MPa. The solubility of the mixture of CO2/H2S in [C8mim][PF6] under various feed compositions were also measured at temperatures of (303.15, 323.15 and 343.15) K and the pressure up to 1 MPa. The solubility of carbon dioxide and hydrogen sulfide increased with increasing pressure and decreased with increasing temperature and the solubility of H2S is about three times that of CO2 in the particular ionic liquid studied. The measured data were... 

Two room temperature liquid salts containing molybdenum(VI), [BMIM] 2[MoO2(NCS)4] (1) and [DMIM] 2[MoO2(NCS)4] (2), were immobilized on ionic liquid-modified silica leading to materials which showed notable catalytic activity for the reduction of sulfoxides into sulfides with triphenylphosphine (PPh3). The molybdenum liquid salts immobilized on the supported ionic liquid phase could be reused at least for three catalytic cycles without significant loss of activity  

The reactions of FeCl3·3H2O and 2-(2′-hydroxyphenyl)-5,6-dihydro-1,3-oxazine (N-O) as a bidentate O, N donor ligand afforded a five-coordinated iron(III) complex, [Fe(N-O) 2Cl], with a distorted trigonal bipyramidal configuration. The complex [Fe(N-O)2Cl] was isolated as an air-stable crystalline solid and was fully characterized, including by single-crystal X-ray structure analysis. The complex [Fe(N-O)2Cl] shows very efficient reactivity in the oxidation of sulfides to their corresponding sulfoxides using urea hydrogen peroxide (UHP) as the oxidant at room temperature under air. To get an insight into the electronic structure of the complex, the experimental studies have been accompanied... 

An oxido-peroxido tungsten(VI) complex [WO(O2)L(CH 30H)] using salicylidene benzoyl hydrazine as a tridentate ONO donor Schiff base (H2L) has been synthesized and characterized by elemental analysis, IR, 1H NMR, molar conductance data, and single-crystal X-ray analysis. The complex was used as a catalyst for epoxidation of olefins and oxidation of sulfides. The results show that epoxides and sulfoxides were produced in high yield, turnover number, and selectivity  

We have studied systematically photocatalytic properties of the vertically aligned ZnO@CdS core-shell nanorods where the features were grown through a multistep procedure including sol-gel for the formation of ZnO seed layer, hydrothermal process to grow ZnO nanorods, and successive ion layer adsorption and reaction (SILAR) process to deposit CdS nanoshells onto the ZnO nanorods. Formation of the ZnO seed layer and vertically aligned ZnO nanorods (d ∼ 40 nm) with a hexagonal cross-section was confirmed by AFM and SEM imaging. Successful capping of ZnO nanorods with homogeneous CdS nanocrystallites (∼5 nm) was ascertained by HRTEM diffraction and imaging. Optical properties of the samples... 

This paper presents a new method for spectrophotometirc detection of sulfide applying fungal peroxidase immobilized on sodium alginate. The sensing scheme was based on decrease of the absorbance of the orange compound, purpurogallin produced from pyrogallol and H2O2 as substrates, due to the inhibition of peroxidase by sulfide. Absorbance of purpurogallin was detected at 420nm by using a spectrophotometer. The proposed method could successfully detect the sulfide in the concentration range of 0.6-7.0μM with a detection limit of 0.4μM. The kinetic parameters of Michaelis-Menten with and without sulfide were also calculated. Possible inhibition mechanism of peroxidase by sulfide was deduced... 

A new manganese(III) complex [(N-O)2Mn(OAc)] was synthesized using 2-(2'-hydroxyphenyl)-5,6-dihydro-1,3-oxazine (N-O) as a bidentate O, N donor. The complex has been characterized by elemental analysis, IR, UV-vis spectroscopy, and X-ray structure analysis. Oxidation of sulfides and epoxidation of olefins, respectively, to their corresponding sulfoxides and epoxides were conducted by this catalyst using urea hydrogen peroxide as oxidant at room temperature under air. The catalyst is efficient in oxidation reactions giving high yields and selectivities  

A discussion covers the general descriptions and basic properties of ionic liquids (IL); main application areas, e.g., solvent replacement, purification of gases, homogenous and heterogeneous catalysis, biological reactions media, and removal of metal ions; and results of the research and works relating to gas solubility measurement and thermodynamic modeling of gas solubility with focus on acid gas solubility in IL. This is an abstract of a paper presented at the CHISA 2012 - 20th International Congress of Chemical and Process Engineering and PRES 2012 - 15th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction (Prague, Czech Republic... 

The hydrogen-induced cracking (HIC) behavior of X70 pipeline steel was studied by means of Linear Polarization Resistance (LPR), hydrogen permeation tests, weight loss and Scanning Electron Microscopy (SEM). In this study, the dissolved HZS was created by chemical reactions in solution. The specimens were immersed into synthetic sea water saturated with HZS. The experimental results showed that the increase of exposure time and HZS concentration leads to an increase of the hydrogen content in X70 steel, which plays a key role in the initiation and propagation of HIC  

A facile sonochemical method has been developed to prepare very small zinc sulfide nanoparticles (ZnS NPs) of extremely small size about 1. nm in diameter using a set of ionic liquids based on the bis (trifluoromethylsulfonyl) imide anion and different cations of 1-alkyl-3-methyl-imidazolium. The structural features and optical properties of the NPs were determined in depth with X-ray powder diffraction (XRD), transmission electron microscopy (TEM), high-resolution TEM (HRTEM), Fourier transform infrared (FTIR) spectroscopy, dynamic light scattering (DLS) analysis, and UV-vis absorption spectroscopy. The energy band gap measurements of ZnS NPs were calculated by UV-vis absorption... 

Multi wall carbon nanotube (MWCNT) doped ZnO nanofibers were fabricated by electrospinning for the first time. We have successfully demonstrated the photocatalytic activity of doped nanofibers under visible light. Scanning electron microscopy showed that the diameter of MWCNT-doped ZnO nanofibers varied from 120 to 300 nm without agglomeration of MWCNT. Fourier transform infrared spectroscopy and X-ray diffraction studies proved the formation of ZnO bond and wurtzite structure with smaller crystal size in doped nanofibers. Raman spectra demonstrated slight shift in bond position after nanofiber doping, indicating the chemical bond between MWCNT and ZnO. X-ray photoelectron spectroscopy... 

We have evaluated the catalytic activity of a molybdenum(VI) oxo-peroxo complex through the oxidation and reduction of sulfur-based compounds. Arylalkyl, diaryl and dialkyl sulfides are selectively oxidized to corresponding sulfoxides, with tert-butyl hydroperoxide (TBHP), in the presence of MoO(O 2)(phox) 2 complex as catalyst. This molybdenum complex was also found to be an efficient catalyst for the deoxygenation of sulfoxides to sulfides with PPh 3 in excellent yields and chemoselectivity