Loading...

Combined UV-C/H2O2-VUV processes for the treatment of an actual slaughterhouse wastewater

Vaezzadeh Naderi, K ; Sharif University of Technology | 2017

1908 Viewed
  1. Type of Document: Article
  2. DOI: 10.1080/03601234.2017.1281650
  3. Publisher: Taylor and Francis Inc , 2017
  4. Abstract:
  5. In this study, a three-factor, three-level Box-Behnken design with response surface methodology were used to maximize the TOC removal and minimize the H2O2 residual in the effluent of the combined UV-C/H2O2-VUV system for the treatment of an actual slaughterhouse wastewater (SWW) collected from one of the meat processing plants in Ontario, Canada. The irradiation time and the initial concentrations of total organic carbon (TOCo) and hydrogen peroxide (H2O2o) were the three predictors, as independent variables, studied in the design of experiments. The multiple response approach was used to obtain desirability response surfaces at the optimum factor settings. Subsequently, the optimum conditions to achieve the maximum percentage TOC removal of 46.19% and minimum H2O2 residual of 1.05% were TOCo of 213 mg L−1, H2O2o of 450 mg L−1, and irradiation time of 9 min. The attained optimal operating conditions were validated with a complementary test. Consequently, the TOC removal of 45.68% and H2O2 residual of 1.03% were achieved experimentally, confirming the statistical model reliability. Three individual processes, VUV alone, VUV/H2O2, and UV-C/H2O2, were also evaluated to compare their performance for the treatment of the actual SWW using the optimum parameters obtained in combined UV-C/H2O2-VUV processes. Results confirmed that an adequate combination of the UV-C/H2O2-VUV processes is essential for an optimized TOC removal and H2O2 residual. Finally, respirometry analyses were also performed to evaluate the biodegradability of the SWW and the BOD removal efficiency of the combined UV-C/H2O2-VUV processes. © 2017 Taylor & Francis Group, LLC
  6. Keywords:
  7. Actual slaughterhouse wastewater ; Combined processes ; Wastewater treatment ; Biodegradability ; Carbon ; Design of experiments ; Effluent treatment ; Effluents ; Irradiation ; Optimization ; Organic carbon ; Surface properties ; Advanced oxidation ; Independent variables ; Initial concentration ; Meat processing plants ; Optimal operating conditions ; Respirometry analysis ; Response surface methodology ; Slaughterhouse wastewater ; Concentration (composition) ; Experimental design ; Oxidation ; Performance assessment ; Pollutant removal ; Ultraviolet radiation ; Canada ; Ontario [Canada] ; Bioremediation ; Chemistry ; Devices ; Oxidation reduction reaction ; Photobioreactor ; Procedures ; Reproducibility ; Sewage ; Slaughterhouse ; Abattoirs ; Biodegradation, Environmental ; Hydrogen peroxide ; Oxidation-Reduction ; Photobioreactors ; Reproducibility of Results ; Ultraviolet Rays ; Waste Disposal, Fluid ; Waste Water
  8. Source: Journal of Environmental Science and Health - Part B Pesticides, Food Contaminants, and Agricultural Wastes ; Volume 52, Issue 5 , 2017 , Pages 314-325 ; 03601234 (ISSN)
  9. URL: https://www.tandfonline.com/doi/full/10.1080/03601234.2017.1281650